CCNA LAB 52: Permitting Console Access to Catalyst IOS Switches—Login Local

小乔

Lab Objective:
The objective of this lab exercise is for you to learn and understand how to configure a switch to be secure on the console port.


Lab Purpose:
Console access configuration is a fundamental skill. Switches are always configured first via console access because there is no Telnet access configured. As a Cisco engineer, as well as in the Cisco CCNA exam, you will be expected to know how to configure a switch to allow access via the console.

Certification Level:
This lab is suitable for CCENT certification exam preparation.

Lab Difficulty:
This lab has a difficulty rating of 4/10.

Readiness Assessment:
When you are ready for your certification exam, you should complete this lab in no more than 5 minutes.

Lab Topology:
Please use the following topology to complete this lab exercise:




Task 1:
Configure a hostname on Sw1.

Task 2:
Permit console access using the local username howtonetwork and the password CISCO.

Task 3:
Test access if you have a PC and console port.


Configuration and Verification
Task 1:
For reference information on configuring hostnames, please refer to earlier labs.

Task 2:
Sw1#conf t
Enter configuration commands, one per line.  End with CTRL/Z.
Sw1(config)#username howtonetwork password CISCO
Sw1(config)#line console 0
Sw1(config-line)#login local
Sw1(config-line)#exit
Task 3:
Here is my console connection to the switch (the password won’t show when typed):

User Access Verification

Username: howtonework
Password:

Switch>



来源: CCNA LAB 49: Configuring Passwords on Catalyst Switches
来源: CCNA LAB 50: Permitting Telnet Access to Catalyst IOS Switches
来源: CCNA LAB  51: Permitting Telnet Access to Catalyst IOS Switches—Login Local

welinker448