Step 1 | Enter privileged mode | router>enable |
Step 2 | Enter global configuration mode | router#configure terminal |
Step 3 | Globally enable IEEE 802.1x | router(config)#dot1x system-auth-control |
Step 4 | Enable AAA | router(config)#aaa new-model |
Step 5 | Enable IEEE 802.1x AAA authentication | router(config)#aaa authentication dot1x default group radius |
Step 6 | Enter interface configuration mode | router(config)#interface interface |
Step 7 | Configure the switchport mode to access | router(config-if)#switchport mode access |
Step 8 | Configure the switchport to act as the IEEE 802.1x authenticator | router(config-if)#dot1x pae authenticator |
Step 9 | (Optional) Configure the switchport IEEE 802.1x host mode | router(config-if)#authentication host-mode [single-host | multi-auth | multi-domain | multi-host] |
Step 10 | Configure the switchport IEEE 802.1x state | router(config-if)#authentication port-control [auto | force-authorized | force-unauthorized] |