HCNA-R&S方向视频！给大家共享下！感兴趣的拿走！

不禁冻

赞赞赞赞赞赞赞赞赞赞赞赞赞赞赞赞赞

sogo1999

感谢分享！

网络1024小白

希望跟大家一起进步！

jsdyhhmlxh

努力学习中

WONDERFULU

666666666

xy928815

XIEXIE

dreamheroes

HCNA，实战用

幸福沉沦

易老三

就看看

iceyyf

dada1234

我来看看 谢谢

jsityym

HCNA-R&S方向的视频

很好的www

交换机在校园网中的应用
1.1 组网需求
如图1-1所示，校园网内部采用典型的核心-汇聚-接入的树形网络结构。接入交换机（图中的ACC）下连宿舍楼、行政楼、科技楼、教学楼和图书馆的LAN交换机、主机或者无线AP，再通过汇聚交换机（图中的AGG）接入到核心交换机（图中的Core）。核心交换机与数据中心机房、AC相连，并且上连双出口，一个出口是学校向ISP、教育网租赁的宽带业务出口，另一个出口是普通的ISP宽带业务出口。
校园网络接入&汇聚&核心组网图

学校现对接入&汇聚&核心组网具体需求如下：
1.         简化网络结构，减少网络配置。
2.         网络易于维护管理，可扩展性强。
3.         能够传输视频数据，进行视频教学、电视电话会议等。

1.2 业务规划
1.         对于有线业务，接入&汇聚&核心采用扁平化的大二层网络，有线用户网关配置在与核心设备相连的上游设备，降低网络的运维难度，简化网络结构。
对于无线业务，核心层设备作为无线接入用户的网关和DHCP服务器，旁挂的AC仅用于管理AP。

2.         核心&汇聚&核心通过层次化、模块化，实现网络易管理、可扩展。
a） 核心设备连接所有的汇聚交换机，转发各个楼栋的流量。
b） 汇聚设备作为各个楼栋数据流量的汇聚点，转发本区域用户到其他区域用户的横向流量，同时发送本区域用户流量到核心层。
c）接入设备作为楼层有线业务、无线业务的接入点。
对于有线用户接入多的宿舍楼、行政楼和科技楼，在接入层交换机上配置QinQ功能，内层VLAN表示宿舍、办公室等最小的独立单元，外层VLAN表示楼栋；有线用户接入少的图书馆和教学楼，每个楼栋分配一个VLAN。
对于无线业务，每个楼栋分配一个无线业务VLAN。

3.         在接入&汇聚&核心交换机上配置组播功能，用于视频教学、电视电话会议等，传输数据中心机房发往接入层的视频数据。

1.3 产品规划
根据楼栋的整体分布情况，对各个楼栋的产品规划如下：
-          宿舍楼：总共4栋，每栋有5层楼，每层楼有20个宿舍，每个宿舍1个Lan Switch，每4个宿舍共用1个AP，每1层楼一个普通接入交换机。

-          行政楼：总共1栋，每栋有5层楼，每层楼有10个办公室，每个办公室1个Lan Switch，每4个办公室共用1个AP，每2层楼共用一个普通接入交换机。

-          科技楼：总共1栋，每栋有5层楼，每层楼有10个科研室，每个科研室1个Lan Switch，每4个科研室共用1个AP，每2层楼共用一个普通接入交换机。

-          教学楼：总共4栋，每栋有5层楼，每层楼有20个教室，每个教室2个AP，每1层楼一个普通接入交换机。

-          图书馆：总共1栋，每栋有5层楼，只有一楼的3个区域有无线需求，在这三个位置各布置1台AP。

各个楼栋的具体设备部署及接口连线如下图所示。



1.4 数据规划1.4.1 有线业务的VLAN规划1.4.2 无线业务的VLAN规划1.4.3 无线业务的IP地址池规划

本帖隐藏的内容

1.5 配置步骤
说明：本案例仅提供了交换机与下游用户通信的配置步骤。
                                步骤 1     配置VLAN业务。
在各交换机上创建VLAN，配置接口加入VLAN，有线用户多的楼栋配置VLAN QinQ功能。
1. 配置宿舍楼的接入交换机。以D-ACC10-1、D-ACC11为例，宿舍楼其他接入交换机
与其配置过程相似。
# 有线侧
<D-ACC11> system-view
[D-ACC11] vlan batch 2 to 21 1111
[D-ACC11] interface gigabitethernet 0/0/1
[D-ACC11-GigabitEthernet0/0/1] port link-type hybrid
[D-ACC11-GigabitEthernet0/0/1] port hybrid untagged vlan 1111
[D-ACC11-GigabitEthernet0/0/1] qinq vlan-translation enable
[D-ACC11-GigabitEthernet0/0/1] port vlan-stacking vlan 2 stack-vlan 1111
[D-ACC11] interface gigabitethernet 0/0/2
[D-ACC11-GigabitEthernet0/0/2] port link-type hybrid
[D-ACC11-GigabitEthernet0/0/2] port hybrid untagged vlan 1111
[D-ACC11-GigabitEthernet0/0/2] qinq vlan-translation enable
[D-ACC11-GigabitEthernet0/0/2] port vlan-stacking vlan 3 stack-vlan 1111
[D-ACC11] interface gigabitethernet 0/0/3
[D-ACC11-GigabitEthernet0/0/3] port link-type hybrid
[D-ACC11-GigabitEthernet0/0/3] port hybrid untagged vlan 1111
[D-ACC11-GigabitEthernet0/0/3] qinq vlan-translation enable
[D-ACC11-GigabitEthernet0/0/3] port vlan-stacking vlan 4 stack-vlan 1111
……
……
[D-ACC11] interface gigabitethernet 0/0/20
[D-ACC11-GigabitEthernet0/0/20] port link-type hybrid
[D-ACC11-GigabitEthernet0/0/20] port hybrid untagged vlan 1111
[D-ACC11-GigabitEthernet0/0/20] qinq vlan-translation enable
[D-ACC11-GigabitEthernet0/0/20] port vlan-stacking vlan 21 stack-vlan 1111
[D-ACC11] interface gigabitethernet 0/0/24
[D-ACC11-GigabitEthernet0/0/24] port link-type trunk
[D-ACC11-GigabitEthernet0/0/24] port trunk allow-pass vlan 1111
[D-ACC11-GigabitEthernet0/0/24] quit
# 无线侧
<D-ACC10-1> system-view
[D-ACC10-1] vlan batch 511
[D-ACC10-1] port-group dormitory1-acc-wlan
[D-ACC10-1-port-group-dormitory1-wlan] group member gigabitethernet 0/0/1 to gigabitethernet 0/0/15
[D-ACC10-1-port-group-dormitory1-acc-wlan] port link-type trunk
[D-ACC10-1-port-group-dormitory1-acc-wlan] port trunk allow-pass vlan 511
[D-ACC10-1-port-group-dormitory1-acc-wlan] quit
[D-ACC10-1] interface gigabitethernet 0/0/24
[D-ACC10-1-GigabitEthernet0/0/24] port link-type trunk
[D-ACC10-1-GigabitEthernet0/0/24] port trunk allow-pass vlan 511
[D-ACC10-1-GigabitEthernet0/0/24] quit
2. 配置宿舍楼的汇聚交换机。
# 有线侧
<D-AGG> system-view
[D-AGG] vlan batch 1111 to 1114
[D-AGG] port-group dormitory1-agg-cable
[D-AGG-port-group-dormitory1-agg-cable] group member gigabitethernet 0/0/1 to gigabitethernet 0/0/5
[D-AGG-port-group-dormitory1-agg-cable] port link-type trunk
[D-AGG-port-group-dormitory1-agg-cable] port trunk allow-pass vlan 1111
[D-AGG-port-group-dormitory1-agg-cable] quit
[D-AGG] port-group dormitory2-agg-cable
[D-AGG-port-group-dormitory2-agg-cable] group member gigabitethernet 0/0/8 to gigabitethernet 0/0/12
[D-AGG-port-group-dormitory2-agg-cable] port link-type trunk
[D-AGG-port-group-dormitory2-agg-cable] port trunk allow-pass vlan 1112
[D-AGG-port-group-dormitory2-agg-cable] quit
[D-AGG] port-group dormitory3-agg-cable
[D-AGG-port-group-dormitory3-agg-cable] group member gigabitethernet 0/0/15 to gigabitethernet 0/0/19
[D-AGG-port-group-dormitory3-agg-cable] port link-type trunk
[D-AGG-port-group-dormitory3-agg-cable] port trunk allow-pass vlan 1113
[D-AGG-port-group-dormitory3-agg-cable] quit
[D-AGG] port-group dormitory4-agg-cable
[D-AGG-port-group-dormitory4-agg-cable] group member gigabitethernet 0/0/22 to gigabitethernet 0/0/26
[D-AGG-port-group-dormitory4-agg-cable] port link-type trunk
[D-AGG-port-group-dormitory4-agg-cable] port trunk allow-pass vlan 1114
[D-AGG-port-group-dormitory4-agg-cable] quit
[D-AGG] interface xgigabitethernet 0/0/1
[D-AGG-XGigabitEthernet0/0/1] port link-type trunk
[D-AGG-XGigabitEthernet0/0/1] port trunk allow-pass vlan 1111 to 1114
[D-AGG-XGigabitEthernet0/0/1] quit
# 无线侧
[D-AGG] vlan batch 511 to 514
[D-AGG] port-group dormitory1-agg-wlan
[D-AGG-port-group-dormitory1-agg-wlan] group member gigabitethernet 0/0/6 to gigabitethernet 0/0/7
[D-AGG-port-group-dormitory1-agg-wlan] port link-type trunk
[D-AGG-port-group-dormitory1-agg-wlan] port trunk allow-pass vlan 511
[D-AGG-port-group-dormitory1-agg-wlan] quit
[D-AGG] port-group dormitory2-agg-wlan
[D-AGG-port-group-dormitory2-agg-wlan] group member gigabitethernet 0/0/13 to gigabitethernet 0/0/14
[D-AGG-port-group-dormitory2-agg-wlan] port link-type trunk
[D-AGG-port-group-dormitory2-agg-wlan] port trunk allow-pass vlan 512
[D-AGG-port-group-dormitory2-agg-wlan] quit
[D-AGG] port-group dormitory3-agg-wlan
[D-AGG-port-group-dormitory3-agg-wlan] group member gigabitethernet 0/0/20 to gigabitethernet 0/0/21
[D-AGG-port-group-dormitory3-agg-wlan] port link-type trunk
[D-AGG-port-group-dormitory3-agg-wlan] port trunk allow-pass vlan 513
[D-AGG-port-group-dormitory3-agg-wlan] quit
[D-AGG] port-group dormitory4-agg-wlan
[D-AGG-port-group-dormitory4-agg-wlan] group member gigabitethernet 0/0/27 to gigabitethernet 0/0/28
[D-AGG-port-group-dormitory4-agg-wlan] port link-type trunk
[D-AGG-port-group-dormitory4-agg-wlan] port trunk allow-pass vlan 514
[D-AGG-port-group-dormitory4-agg-wlan] quit
[D-AGG] interface xgigabitethernet 0/0/1
[D-AGG-XGigabitEthernet0/0/1] port link-type trunk
[D-AGG-XGigabitEthernet0/0/1] port trunk allow-pass vlan 511 to 514
[D-AGG-XGigabitEthernet0/0/1] quit
3. 配置行政楼的接入交换机。以E-ACC10、E-ACC11为例，行政楼其他接入交换机
与其配置过程相似。
# 有线侧
<E-ACC11> system-view
[E-ACC11] vlan batch 2 to 21 1211
[E-ACC11] interface gigabitethernet 0/0/1
[E-ACC11-GigabitEthernet0/0/1] port link-type hybrid
[E-ACC11-GigabitEthernet0/0/1] port hybrid untagged vlan 1211
[E-ACC11-GigabitEthernet0/0/1] qinq vlan-translation enable
[E-ACC11-GigabitEthernet0/0/1] port vlan-stacking vlan 2 stack-vlan 1211
[E-ACC11] interface gigabitethernet 0/0/2
[E-ACC11-GigabitEthernet0/0/2] port link-type hybrid
[E-ACC11-GigabitEthernet0/0/2] port hybrid untagged vlan 1211
[E-ACC11-GigabitEthernet0/0/2] qinq vlan-translation enable
[E-ACC11-GigabitEthernet0/0/2] port vlan-stacking vlan 3 stack-vlan 1211
[E-ACC11] interface gigabitethernet 0/0/3
[E-ACC11-GigabitEthernet0/0/3] port link-type hybrid
[E-ACC11-GigabitEthernet0/0/3] port hybrid untagged vlan 1211
[E-ACC11-GigabitEthernet0/0/3] qinq vlan-translation enable
[E-ACC11-GigabitEthernet0/0/3] port vlan-stacking vlan 4 stack-vlan 1211
……
……
[E-ACC11] interface gigabitethernet 0/0/20
[E-ACC11-GigabitEthernet0/0/20] port link-type hybrid
[E-ACC11-GigabitEthernet0/0/20] port hybrid untagged vlan 1211
[E-ACC11-GigabitEthernet0/0/20] qinq vlan-translation enable
[E-ACC11-GigabitEthernet0/0/20] port vlan-stacking vlan 21 stack-vlan 1211
[E-ACC11] interface gigabitethernet 0/0/24
[E-ACC11-GigabitEthernet0/0/24] port link-type trunk
[E-ACC11-GigabitEthernet0/0/24] port trunk allow-pass vlan 1211
[E-ACC11-GigabitEthernet0/0/24] quit
# 无线侧
<E-ACC10> system-view
[E-ACC10] vlan batch 521
[E-ACC10] port-group executive-building-acc-wlan
[E-ACC10-port-group-executive-building-acc-wlan] group member gigabitethernet 0/0/1 to gigabitethernet 0/0/15
[E-ACC10-port-group-executive-building-acc-wlan] port link-type trunk
[E-ACC10-port-group-executive-building-acc-wlan] port trunk allow-pass vlan 521
[E-ACC10-port-group-executive-building-acc-wlan] quit
[E-ACC10] interface gigabitethernet 0/0/24
[E-ACC10-GigabitEthernet0/0/24] port link-type trunk
[E-ACC10-GigabitEthernet0/0/24] port trunk allow-pass vlan 521
[E-ACC10-GigabitEthernet0/0/24] quit
4. 配置科技楼的接入交换机。以S-ACC10、S-ACC11为例，科技楼其他接入交换机
与其配置过程相似。
# 有线侧
<S-ACC11> system-view
[S-ACC11] vlan batch 2 to 21 1311
[S-ACC11] interface gigabitethernet 0/0/1
[S-ACC11-GigabitEthernet0/0/1] port link-type hybrid
[S-ACC11-GigabitEthernet0/0/1] port hybrid untagged vlan 1311
[S-ACC11-GigabitEthernet0/0/1] qinq vlan-translation enable
[S-ACC11-GigabitEthernet0/0/1] port vlan-stacking vlan 2 stack-vlan 1311
[S-ACC11] interface gigabitethernet 0/0/2
[S-ACC11-GigabitEthernet0/0/2] port link-type hybrid
[S-ACC11-GigabitEthernet0/0/2] port hybrid untagged vlan 1311
[S-ACC11-GigabitEthernet0/0/2] qinq vlan-translation enable
[S-ACC11-GigabitEthernet0/0/2] port vlan-stacking vlan 3 stack-vlan 1311
[S-ACC11] interface gigabitethernet 0/0/3
[S-ACC11-GigabitEthernet0/0/3] port link-type hybrid
[S-ACC11-GigabitEthernet0/0/3] port hybrid untagged vlan 1311
[S-ACC11-GigabitEthernet0/0/3] qinq vlan-translation enable
[S-ACC11-GigabitEthernet0/0/3] port vlan-stacking vlan 4 stack-vlan 1311
……
……
[S-ACC11] interface gigabitethernet 0/0/20
[S-ACC11-GigabitEthernet0/0/20] port link-type hybrid
[S-ACC11-GigabitEthernet0/0/20] port hybrid untagged vlan 1311
[S-ACC11-GigabitEthernet0/0/20] qinq vlan-translation enable
[S-ACC11-GigabitEthernet0/0/20] port vlan-stacking vlan 21 stack-vlan 1311
[S-ACC11] interface gigabitethernet 0/0/24
[S-ACC11-GigabitEthernet0/0/24] port link-type trunk
[S-ACC11-GigabitEthernet0/0/24] port trunk allow-pass vlan 1311
[S-ACC11-GigabitEthernet0/0/24] quit
# 无线侧
<S-ACC10> system-view
[S-ACC10] vlan batch 531
[S-ACC10] port-group sience-building-acc-wlan
[S-ACC10-port-group-sience-building-acc-wlan] group member gigabitethernet 0/0/1 to gigabitethernet 0/0/15
[S-ACC10-port-group-sience-building-acc-wlan] port link-type trunk
[S-ACC10-port-group-sience-building-acc-wlan] port trunk allow-pass vlan 531
[S-ACC10-port-group-sience-building-acc-wlan] quit
[S-ACC10] interface gigabitethernet 0/0/24
[S-ACC10-GigabitEthernet0/0/24] port link-type trunk
[S-ACC10-GigabitEthernet0/0/24] port trunk allow-pass vlan 531
[S-ACC10-GigabitEthernet0/0/24] quit
5. 配置图书馆的接入交换机。
# 有线侧
<L-ACC11> system-view
[L-ACC11] vlan batch 1411
[L-ACC11] port-group library-acc-cable
[L-ACC11-port-group-library-acc-cable] group member gigabitethernet 0/0/1 to gigabitethernet 0/0/5
[L-ACC11-port-group-library-acc-cable] port link-type access
[L-ACC11-port-group-library-acc-cable] port trunk default vlan 1411
[L-ACC11-port-group-library-acc-cable] quit
[L-ACC11] interface gigabitethernet 0/0/24
[L-ACC11-GigabitEthernet0/0/24] port link-type trunk
[L-ACC11-GigabitEthernet0/0/24] port trunk allow-pass vlan 1411
[L-ACC11-GigabitEthernet0/0/24] quit
# 无线侧
[L-ACC11] vlan batch 541
[L-ACC11] port-group library-acc-wlan
[L-ACC11-port-group-library-acc-wlan] group member gigabitethernet 0/0/6 to gigabitethernet 0/0/8
[L-ACC11-port-group-library-acc-wlan] port link-type trunk
[L-ACC11-port-group-library-acc-wlan] port trunk allow-pass vlan 541
[L-ACC11-port-group-library-acc-wlan] quit
[L-ACC11] interface gigabitethernet 0/0/24
[L-ACC11-GigabitEthernet0/0/24] port link-type trunk
[L-ACC11-GigabitEthernet0/0/24] port trunk allow-pass vlan 541
[L-ACC11-GigabitEthernet0/0/24] quit
6. 配置行政楼&科技楼&图书馆的汇聚交换机。
# 有线侧
<E&S&L-AGG> system-view
[E&S&L-AGG] vlan batch 1211 1311 1411
[E&S&L-AGG] port-group executive-building-agg-cable
[E&S&L-AGG-port-group-executive-building-agg-cable] group member gigabitethernet 0/0/1 to gigabitethernet 0/0/3
[E&S&L-AGG-port-group-executive-building-agg-cable] port link-type trunk
[E&S&L-AGG-port-group-executive-building-agg-cable] port trunk allow-pass vlan 1211
[E&S&L-AGG-port-group-executive-building-agg-cable] quit
[E&S&L-AGG] port-group sience-building-agg-cable
[E&S&L-AGG-port-group-sience-building-agg-cable] group member gigabitethernet 0/0/5 to gigabitethernet 0/0/7
[E&S&L-AGG-port-group-sience-building-agg-cable] port link-type trunk
[E&S&L-AGG-port-group-sience-building-agg-cable] port trunk allow-pass vlan 1311
[E&S&L-AGG-port-group-sience-building-agg-cable] quit
[E&S&L-AGG] interface gigabitethernet 0/0/9
[E&S&L-AGG-GigabitEthernet0/0/9] description library's downlink interface of cable and wlan
[E&S&L-AGG-GigabitEthernet0/0/9] port link-type trunk
[E&S&L-AGG-GigabitEthernet0/0/9] port trunk allow-pass vlan 1411
[E&S&L-AGG-GigabitEthernet0/0/9] quit
[E&S&L-AGG] interface xgigabitethernet 0/0/1
[E&S&L-AGG-XGigabitEthernet0/0/1] port link-type trunk
[E&S&L-AGG-XGigabitEthernet0/0/1] port trunk allow-pass vlan 1211 1311 1411
[E&S&L-AGG-XGigabitEthernet0/0/1] quit
# 无线侧
[E&S&L-AGG] interface gigabitethernet 0/0/4
[E&S&L-AGG-GigabitEthernet0/0/4] description executive building's downlink interface of wlan
[E&S&L-AGG-GigabitEthernet0/0/4] port link-type trunk
[E&S&L-AGG-GigabitEthernet0/0/4] port trunk allow-pass vlan 521
[E&S&L-AGG-GigabitEthernet0/0/4] quit
[E&S&L-AGG] interface gigabitethernet 0/0/8
[E&S&L-AGG-GigabitEthernet0/0/8] description sience building's downlink interface of wlan
[E&S&L-AGG-GigabitEthernet0/0/8] port link-type trunk
[E&S&L-AGG-GigabitEthernet0/0/8] port trunk allow-pass vlan 531
[E&S&L-AGG-GigabitEthernet0/0/8] quit
[E&S&L-AGG] interface gigabitethernet 0/0/9
[E&S&L-AGG-GigabitEthernet0/0/9] port link-type trunk
[E&S&L-AGG-GigabitEthernet0/0/9] port trunk allow-pass vlan 541
[E&S&L-AGG-GigabitEthernet0/0/9] quit
[E&S&L-AGG] interface xgigabitethernet 0/0/1
[E&S&L-AGG-XGigabitEthernet0/0/1] port link-type trunk
[E&S&L-AGG-XGigabitEthernet0/0/1] port trunk allow-pass vlan 521 531 541
[E&S&L-AGG-XGigabitEthernet0/0/1] quit

7. 配置教学楼的接入交换机。以S-ACC10、S-ACC11为例，科技楼其他接入交换机
与其配置过程相似。
# 有线侧
<T-ACC11> system-view
[T-ACC11] vlan batch 1511
[T-ACC11] port-group teach-building1-acc-cable
[T-ACC11-port-group-teach-building1-acc-cable] group member gigabitethernet 0/0/1 to gigabitethernet 0/0/20
[T-ACC11-port-group-teach-building1-acc-cable] port link-type access
[T-ACC11-port-group-teach-building1-acc-cable] port trunk default vlan 1511
[T-ACC11-port-group-teach-building1-acc-cable] quit
[T-ACC11] interface gigabitethernet 0/0/24
[T-ACC11-GigabitEthernet0/0/24] port link-type trunk
[T-ACC11-GigabitEthernet0/0/24] port trunk allow-pass vlan 1511
[T-ACC11-GigabitEthernet0/0/24] quit
# 无线侧
<T-ACC10-1> system-view
[T-ACC10-1] vlan batch 551
[T-ACC10-1] port-group teach-building1-acc-wlan
[T-ACC10-1-port-group-teach-building1-acc-wlan] group member gigabitethernet 0/0/1 to gigabitethernet 0/0/40
[T-ACC10-1-port-group-teach-building1-acc-wlan] port link-type trunk
[T-ACC10-1-port-group-teach-building1-acc-wlan] port trunk allow-pass vlan 551
[T-ACC10-1-port-group-teach-building1-acc-wlan] quit
[T-ACC10-1] interface gigabitethernet 0/0/42
[T-ACC10-1-GigabitEthernet0/0/42] port link-type trunk
[T-ACC10-1-GigabitEthernet0/0/42] port trunk allow-pass vlan 551
[T-ACC10-1-GigabitEthernet0/0/42] quit
8. 配置教学楼的汇聚交换机。
# 有线侧
<T-AGG> system-view
[T-AGG] vlan batch 1511 to 1514
[T-AGG] port-group teach-building1-agg-cable
[T-AGG-port-group-teach-building1-agg-cable] group member gigabitethernet 0/0/1 to gigabitethernet 0/0/5
[T-AGG-port-group-teach-building1-agg-cable] port link-type trunk
[T-AGG-port-group-teach-building1-agg-cable] port trunk allow-pass vlan 1511
[T-AGG-port-group-teach-building1-agg-cable] quit
[T-AGG] port-group teach-building2-agg-cable
[T-AGG-port-group-teach-building2-agg-cable] group member gigabitethernet 0/0/11 to gigabitethernet 0/0/15
[T-AGG-port-group-teach-building2-agg-cable] port link-type trunk
[T-AGG-port-group-teach-building2-agg-cable] port trunk allow-pass vlan 1512
[T-AGG-port-group-teach-building2-agg-cable] quit
[T-AGG] port-group teach-building3-agg-cable
[T-AGG-port-group-teach-building3-agg-cable] group member gigabitethernet 0/0/21 to gigabitethernet 0/0/25
[T-AGG-port-group-teach-building3-agg-cable] port link-type trunk
[T-AGG-port-group-teach-building3-agg-cable] port trunk allow-pass vlan 1513
[T-AGG-port-group-teach-building3-agg-cable] quit
[T-AGG] port-group teach-building4-agg-cable
[T-AGG-port-group-teach-building1-agg-cable] group member gigabitethernet 0/0/31 to gigabitethernet 0/0/35
[T-AGG-port-group-teach-building4-agg-cable] port link-type trunk
[T-AGG-port-group-teach-building4-agg-cable] port trunk allow-pass vlan 1514
[T-AGG-port-group-teach-building4-agg-cable] quit
[T-AGG] interface xgigabitethernet 0/0/1
[T-AGG-XGigabitEthernet0/0/1] port link-type trunk
[T-AGG-XGigabitEthernet0/0/1] port trunk allow-pass vlan 1511 to 1514
[T-AGG-XGigabitEthernet0/0/1] quit
# 无线侧
[T-AGG] vlan batch 551 to 554
[T-AGG] port-group teach-building1-agg-wlan
[T-AGG-port-group-teach-building1-agg-wlan] group member gigabitethernet 0/0/6 to gigabitethernet 0/0/10
[T-AGG-port-group-teach-building1-agg-wlan] port link-type trunk
[T-AGG-port-group-teach-building1-agg-wlan] port trunk allow-pass vlan 551
[T-AGG-port-group-teach-building1-agg-wlan] quit
[T-AGG] port-group teach-building2-agg-wlan
[T-AGG-port-group-teach-building2-agg-wlan] group member gigabitethernet 0/0/16 to gigabitethernet 0/0/20
[T-AGG-port-group-teach-building2-agg-wlan] port link-type trunk
[T-AGG-port-group-teach-building2-agg-wlan] port trunk allow-pass vlan 552
[T-AGG-port-group-teach-building2-agg-wlan] quit
[T-AGG] port-group teach-building3-agg-wlan
[T-AGG-port-group-teach-building3-agg-wlan] group member gigabitethernet 0/0/26 to gigabitethernet 0/0/30
[T-AGG-port-group-teach-building3-agg-wlan] port link-type trunk
[T-AGG-port-group-teach-building3-agg-wlan] port trunk allow-pass vlan 553
[T-AGG-port-group-teach-building3-agg-wlan] quit
[T-AGG] port-group teach-building4-agg-wlan
[T-AGG-port-group-teach-building4-agg-wlan] group member gigabitethernet 0/0/36 to gigabitethernet 0/0/40
[T-AGG-port-group-teach-building4-agg-wlan] port link-type trunk
[T-AGG-port-group-teach-building4-agg-wlan] port trunk allow-pass vlan 554
[T-AGG-port-group-teach-building4-agg-wlan] quit
[T-AGG] interface xgigabitethernet 0/0/1
[T-AGG-XGigabitEthernet0/0/1] port link-type trunk
[T-AGG-XGigabitEthernet0/0/1] port trunk allow-pass vlan 551 to 554
[T-AGG-XGigabitEthernet0/0/1] quit
9. 配置核心交换机。
<Core> system-view
[Core] vlan 1111
[Core-vlan1111] description dormitory1’s cable
[Core-vlan1111] quit
[Core] vlan 1112
[Core-vlan1112] description dormitory2’s cable
[Core-vlan1112] quit
[Core] vlan 1113
[Core-vlan1113] description dormitory3’s cable
[Core-vlan1113] quit
[Core] vlan 1114
[Core-vlan1114] description dormitory4’s cable
[Core-vlan1114] quit
[Core] vlan 1211
[Core-vlan1211] description executive building’s cable
[Core-vlan1211] quit
[Core] vlan 1311
[Core-vlan1311] description sience building’s cable
[Core-vlan1311] quit
[Core] vlan 1411
[Core-vlan1411] description library’s cable
[Core-vlan1411] quit
[Core] vlan 1511
[Core-vlan1511] description teach building1’s cable
[Core-vlan1511] quit
[Core] vlan 1512
[Core-vlan1512] description teach building2’s cable
[Core-vlan1512] quit
[Core] vlan 1513
[Core-vlan1513] description teach building3’s cable
[Core-vlan1513] quit
[Core] vlan 1514
[Core-vlan1514] description teach building4’s cable
[Core-vlan1514] quit
[Core] vlan 511
[Core-vlan511] description dormitory1’s wlan
[Core-vlan511] quit
[Core] vlan 512
[Core-vlan512] description dormitory2’s wlan
[Core-vlan512] quit
[Core] vlan 513
[Core-vlan513] description dormitory3’s wlan
[Core-vlan513] quit
[Core] vlan 514
[Core-vlan514] description dormitory4’s wlan
[Core-vlan514] quit
[Core] vlan 521
[Core-vlan521] description executive building’s wlan
[Core-vlan521] quit
[Core] vlan 531
[Core-vlan531] description sience building’s wlan
[Core-vlan531] quit
[Core] vlan 541
[Core-vlan541] description library’s wlan
[Core-vlan541] quit
[Core] vlan 551
[Core-vlan551] description teach building1’s wlan
[Core-vlan551] quit
[Core] vlan 552
[Core-vlan552] description teach building2’s wlan
[Core-vlan552] quit
[Core] vlan 553
[Core-vlan553] description teach building3’s wlan
[Core-vlan553] quit
[Core] vlan 554
[Core-vlan554] description teach building4’s wlan
[Core-vlan554] quit
[Core] interface xgigabitethernet 0/0/1
[Core-XGigabitEthernet0/0/1] description dormitory’s downlink interface
[Core-XGigabitEthernet0/0/1] port link-type trunk
[Core-XGigabitEthernet0/0/1] port trunk allow-pass vlan 511 to 514 1111 to 1114
[Core-XGigabitEthernet0/0/1] quit
[Core] interface xgigabitethernet 0/0/2
[Core-XGigabitEthernet0/0/2] description executive building&sience builing&library’s downlink interface
[Core-XGigabitEthernet0/0/2] port link-type trunk
[Core-XGigabitEthernet0/0/2] port trunk allow-pass vlan 521 531 541 1211 1311 1411
[Core-XGigabitEthernet0/0/2] quit
[Core] interface xgigabitethernet 0/0/3
[Core-XGigabitEthernet0/0/3] description teach building’s downlink interface
[Core-XGigabitEthernet0/0/3] port link-type trunk
[Core-XGigabitEthernet0/0/3] port trunk allow-pass vlan 551 to 554 1511 to 1514
[Core-XGigabitEthernet0/0/3] quit
                                步骤 2     配置为无线用户分配地址的DHCP业务。
[Core] dhcp enable
[Core] interface vlanif 511
[Core-Vlanif511] description dormitory1’s wlan gagteway
[Core-Vlanif511] ip address 192.168.0.255 23
[Core-Vlanif511] dhcp select interface
[Core-Vlanif511] quit
[Core] interface vlanif 512
[Core-Vlanif512] description dormitory2’s wlan gagteway
[Core-Vlanif512] ip address 192.168.2.255 23
[Core-Vlanif512] dhcp select interface
[Core-Vlanif512] quit
[Core] interface vlanif 513
[Core-Vlanif513] description dormitory3’s wlan gagteway
[Core-Vlanif513] ip address 192.168.4.255 23
[Core-Vlanif513] dhcp select interface
[Core-Vlanif513] quit
[Core] interface vlanif 514
[Core-Vlanif514] description dormitory4’s wlan gagteway
[Core-Vlanif514] ip address 192.168.6.255 23
[Core-Vlanif514] dhcp select interface
[Core-Vlanif514] quit
[Core] interface vlanif 521
[Core-Vlanif521] description executive building’s wlan gagteway
[Core-Vlanif521] ip address 192.168.8.255 23
[Core-Vlanif521] dhcp select interface
[Core-Vlanif521] quit
[Core] interface vlanif 531
[Core-Vlanif531] description sience building’s wlan gagteway
[Core-Vlanif531] ip address 192.168.10.255 23
[Core-Vlanif531] dhcp select interface
[Core-Vlanif531] quit
[Core] interface vlanif 541
[Core-Vlanif541] description library’s wlan gagteway
[Core-Vlanif541] ip address 192.168.16.255 21
[Core-Vlanif541] dhcp select interface
[Core-Vlanif541] quit
[Core] interface vlanif 551
[Core-Vlanif551] description teach building1’s wlan gagteway
[Core-Vlanif551] ip address 10.1.0.255 20
[Core-Vlanif551] dhcp select interface
[Core-Vlanif551] quit
[Core] interface vlanif 552
[Core-Vlanif552] description teach building2’s wlan gagteway
[Core-Vlanif552] ip address 10.1.16.255 20
[Core-Vlanif552] dhcp select interface
[Core-Vlanif552] quit
[Core] interface vlanif 553
[Core-Vlanif553] description teach building3’s wlan gagteway
[Core-Vlanif553] ip address 10.1.32.255 20
[Core-Vlanif553] dhcp select interface
[Core-Vlanif553] quit
[Core] interface vlanif 554
[Core-Vlanif554] description teach building4’s wlan gagteway
[Core-Vlanif554] ip address 10.1.48.255 20
[Core-Vlanif554] dhcp select interface
[Core-Vlanif554] quit
配置完成后，可执行命令display ip pool检查IP地址池的分配情况，“Used”字段显示已经分配出去的IP地址数量。
                                步骤 3     配置有线侧的组播业务。
在转发有线业务数据的业务VLAN内使能IGMP Snooping功能，通过二层组播功能，实现组播数据在二层网络的精确转发。
# 以T-ACC11为例，其他所有交换机与其配置相似。
[T-ACC11] igmp-snooping enable
[T-ACC11] igmp-snooping enable vlan 1111
# 配置完成后，可以通过display l2-multicast forwarding-table查看二层组播转发表。
                                步骤 4     配置无线侧的组播业务。
# 在核心交换机的网关接口使能IGMP功能，用于接收下游用户的IGMP报文，维持组成员关系。
[Core] multicast routing-enable
[Core] interface vlanif 511
[Core-Vlanif511] pim sm
[Core-Vlanif511] igmp enable
[Core-Vlanif511] quit
[Core] interface vlanif 512
[Core-Vlanif512] pim sm
[Core-Vlanif512] igmp enable
[Core-Vlanif512] quit
[Core] interface vlanif 513
[Core-Vlanif513] pim sm
[Core-Vlanif513] igmp enable
[Core-Vlanif513] quit
[Core] interface vlanif 514
[Core-Vlanif514] pim sm
[Core-Vlanif514] igmp enable
[Core-Vlanif514] quit
[Core] interface vlanif 521
[Core-Vlanif521] pim sm
[Core-Vlanif521] igmp enable
[Core-Vlanif521] quit
[Core] interface vlanif 531
[Core-Vlanif531] pim sm
[Core-Vlanif531] igmp enable
[Core-Vlanif531] quit
[Core] interface vlanif 541
[Core-Vlanif541] pim sm
[Core-Vlanif541] igmp enable
[Core-Vlanif541] quit
[Core] interface vlanif 551
[Core-Vlanif551] pim sm
[Core-Vlanif551] igmp enable
[Core-Vlanif551] quit
[Core] interface vlanif 552
[Core-Vlanif552] pim sm
[Core-Vlanif552] igmp enable
[Core-Vlanif552] quit
[Core] interface vlanif 553
[Core-Vlanif553] pim sm
[Core-Vlanif553] igmp enable
[Core-Vlanif553] quit
[Core] interface vlanif 554
[Core-Vlanif554] pim sm
[Core-Vlanif554] igmp enable
[Core-Vlanif554] quit
# 在转发无线业务数据的业务VLAN内使能IGMP Snooping功能，通过二层组播功能，实现组播数据在二层网络的精确转发。以T-ACC10-1为例，其他所有交换机与其配置相似。
[T-ACC10-1] igmp-snooping enable
[T-ACC10-1] igmp-snooping enable vlan 511
# 配置完成后，可以通过display igmp group命令用来查看通过主机发送报告报文动态加入的IGMP组播组信息；通过 display l2-multicast forwarding-table命令查看二层组播转发表。

xutuobaby

本门考试一直没有变题  看本题库可以放心去参加考试

zongwei1314

好东西，感谢分享