- 积分
- 14
- 鸿鹄币
- 个
- 好评度
- 点
- 精华
- 注册时间
- 2014-1-21
- 最后登录
- 1970-1-1
- 阅读权限
- 10
- 听众
- 收听
网络小学徒
|
楼主 |
发表于 2014-2-27 10:59:46
|
显示全部楼层
A previous installation of VMware Tools has been detected.
The previous installation was made by the tar installer (version 4).
Keeping the tar4 installer database format.
Uninstalling the tar installation of VMware Tools.
Stopping VMware Tools services in the virtual machine:
Guest operating system daemon: [确定]
Guest memory manager: [确定]
关闭环回接口： [确定]
Guest vmxnet fast network device: [确定]
File /etc/X11/xorg.conf is backed up to /etc/X11/xorg.conf.old.1.
The removal of VMware Tools 6.0.3 build-80004 for Linux completed successfully.
Thank you for having tried this software.
Installing VMware Tools.
In which directory do you want to install the binary files?
[/usr/bin]
What is the directory that contains the init directories (rc0.d/ to rc6.d/)?
[/etc/rc.d]
What is the directory that contains the init scripts?
[/etc/rc.d/init.d]
In which directory do you want to install the daemon files?
[/usr/sbin]
In which directory do you want to install the library files?
[/usr/lib/vmware-tools]
The path "/usr/lib/vmware-tools" does not exist currently. This program is
going to create it, including needed parent directories. Is this what you want?
[yes]
In which directory do you want to install the documentation files?
[/usr/share/doc/vmware-tools]
The path "/usr/share/doc/vmware-tools" does not exist currently. This program
is going to create it, including needed parent directories. Is this what you
want? [yes]
The installation of VMware Tools 6.0.3 build-80004 for Linux completed
successfully. You can decide to remove this software from your system at any
time by invoking the following command: "/usr/bin/vmware-uninstall-tools.pl".
Before running VMware Tools for the first time, you need to configure it by
invoking the following command: "/usr/bin/vmware-config-tools.pl". Do you want
this program to invoke the command for you now? [yes]
Stopping VMware Tools services in the virtual machine:
Guest operating system daemon: [确定]
Guest memory manager: [确定]
关闭环回接口： [确定]
Guest vmxnet fast network device: [确定]
Trying to find a suitable vmmemctl module for your running kernel.
None of the pre-built vmmemctl modules for VMware Tools is suitable for your
running kernel. Do you want this program to try to build the vmmemctl module
for your system (you need to have a C compiler installed on your system)?
[yes]
Using compiler "/usr/bin/gcc". Use environment variable CC to override.
What is the location of the directory of C header files that match your running
kernel? [/lib/modules/2.6.25.6-55.fc9.i686/build/include]
Extracting the sources of the vmmemctl module.
Building the vmmemctl module.
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-config6/vmmemctl-only'
make -C /lib/modules/2.6.25.6-55.fc9.i686/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: Entering directory `/usr/src/kernels/2.6.25.6-55.fc9.i686'
CC [M] /tmp/vmware-config6/vmmemctl-only/os.o
SHIPPED /tmp/vmware-config6/vmmemctl-only/vmmemctl1.o
LD [M] /tmp/vmware-config6/vmmemctl-only/vmmemctl.o
Building modules, stage 2.
MODPOST 1 modules
WARNING: could not find /tmp/vmware-config6/vmmemctl-only/.vmmemctl1.o.cmd for /tmp/vmware-config6/vmmemctl-only/vmmemctl1.o
CC /tmp/vmware-config6/vmmemctl-only/vmmemctl.mod.o
LD [M] /tmp/vmware-config6/vmmemctl-only/vmmemctl.ko
make[1]: Leaving directory `/usr/src/kernels/2.6.25.6-55.fc9.i686'
cp -f vmmemctl.ko ./../vmmemctl.o
make: Leaving directory `/tmp/vmware-config6/vmmemctl-only'
The module loads perfectly in the running kernel.
Trying to find a suitable vmhgfs module for your running kernel.
None of the pre-built vmhgfs modules for VMware Tools is suitable for your
running kernel. Do you want this program to try to build the vmhgfs module for
your system (you need to have a C compiler installed on your system)? [yes]
Extracting the sources of the vmhgfs module.
Building the vmhgfs module.
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-config6/vmhgfs-only'
make -C /lib/modules/2.6.25.6-55.fc9.i686/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: Entering directory `/usr/src/kernels/2.6.25.6-55.fc9.i686'
CC [M] /tmp/vmware-config6/vmhgfs-only/backdoor.o
CC [M] /tmp/vmware-config6/vmhgfs-only/backdoorGcc32.o
CC [M] /tmp/vmware-config6/vmhgfs-only/bdhandler.o
CC [M] /tmp/vmware-config6/vmhgfs-only/cpName.o
In file included from include/linux/string.h:11,
from /tmp/vmware-config6/vmhgfs-only/cpName.h:18,
from /tmp/vmware-config6/vmhgfs-only/cpName.c:18:
include/linux/types.h:40: 错误：与‘uintptr_t’类型冲突
/tmp/vmware-config6/vmhgfs-only/vm_basic_types.h:170: 错误：‘uintptr_t’的上一个声明在此
make[2]: *** [/tmp/vmware-config6/vmhgfs-only/cpName.o] 错误 1
make[1]: *** [_module_/tmp/vmware-config6/vmhgfs-only] 错误 2
make[1]: Leaving directory `/usr/src/kernels/2.6.25-14.fc9.i686'
make: *** [vmhgfs.ko] 错误 2
make: Leaving directory `/tmp/vmware-config6/vmhgfs-only'
Unable to build the vmhgfs module.
The filesystem driver (vmhgfs module) is used only for the shared folder
feature. The rest of the software provided by VMware Tools is designed to work
independently of this feature.
If you wish to have the shared folders feature, you can install the driver by
running vmware-config-tools.pl again after making sure that gcc, binutils, make
and the kernel sources for your running kernel are installed on your machine.
These packages are available on your distribution's installation CD.
[ Press Enter key to continue ]
Trying to find a suitable vmxnet module for your running kernel.
None of the pre-built vmxnet modules for VMware Tools is suitable for your
running kernel. Do you want this program to try to build the vmxnet module for
your system (you need to have a C compiler installed on your system)? [yes]
Extracting the sources of the vmxnet module.
Building the vmxnet module.
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-config7/vmxnet-only'
make -C /lib/modules/2.6.25.6-55.fc9.i686/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: Entering directory `/usr/src/kernels/2.6.25.6-55.fc9.i686'
CC [M] /tmp/vmware-config7/vmxnet-only/vmxnet.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/vmware-config7/vmxnet-only/vmxnet.mod.o
LD [M] /tmp/vmware-config7/vmxnet-only/vmxnet.ko
make[1]: Leaving directory `/usr/src/kernels/2.6.25.6-55.fc9.i686'
cp -f vmxnet.ko ./../vmxnet.o
make: Leaving directory `/tmp/vmware-config7/vmxnet-only'
The module loads perfectly in the running kernel.
Trying to find a suitable vmblock module for your running kernel.
None of the pre-built vmblock modules for VMware Tools is suitable for your
running kernel. Do you want this program to try to build the vmblock module
for your system (you need to have a C compiler installed on your system)?
[yes]
Extracting the sources of the vmblock module.
Building the vmblock module.
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-config7/vmblock-only'
make -C /lib/modules/2.6.25.6-55.fc9.i686/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: Entering directory `/usr/src/kernels/2.6.25-14.fc9.i686'
CC [M] /tmp/vmware-config7/vmblock-only/linux/block.o
CC [M] /tmp/vmware-config7/vmblock-only/linux/control.o
CC [M] /tmp/vmware-config7/vmblock-only/linux/dbllnklst.o
CC [M] /tmp/vmware-config7/vmblock-only/linux/dentry.o
/tmp/vmware-config7/vmblock-only/linux/dentry.c: 在函数‘DentryOpRevalidate’中:
/tmp/vmware-config7/vmblock-only/linux/dentry.c:101: 错误：‘struct nameidata’没有名为‘dentry’的成员
/tmp/vmware-config7/vmblock-only/linux/dentry.c:101: 错误：‘struct nameidata’没有名为‘dentry’的成员
/tmp/vmware-config7/vmblock-only/linux/dentry.c:102: 错误：隐式声明函数‘path_release’
make[2]: *** [/tmp/vmware-config7/vmblock-only/linux/dentry.o] 错误 1
make[1]: *** [_module_/tmp/vmware-config7/vmblock-only] 错误 2
make[1]: Leaving directory `/usr/src/kernels/2.6.25-14.fc9.i686'
make: *** [vmblock.ko] 错误 2
make: Leaving directory `/tmp/vmware-config7/vmblock-only'
Unable to build the vmblock module.
The vmblock module enables dragging or copying files from within a host and
dropping or pasting them onto your guest (host to guest drag and drop and file
copy/paste). The rest of the software provided by VMware Tools is designed to
work independently of this feature (including guest to host drag and drop and
file copy/paste).
If you would like the host to guest drag and drop and file copy/paste features,
you can install the driver by running vmware-config-tools.pl again after making
sure that gcc, binutils, make and the kernel sources for your running kernel
are installed on your machine. These packages are available on your
distribution's installation CD.
[ Press Enter key to continue ]
[EXPERIMENTAL] The Virtual Machine Communication Interface (VMCI) service
provides a new communication capability with the Host, primarily for
development at the moment. Would you like to enable this feature? [no]
Detected X.org version 0.0.0.
No drivers for X.org version: 0.0.0.
Do you want to change the display size that X starts with? (yes/no) [no]
Starting VMware Tools services in the virtual machine:
Switching to guest configuration: [确定]
Guest memory manager: [确定]
Guest vmxnet fast network device: [确定]
DMA setup: [确定]
Guest operating system daemon: [确定]
The configuration of VMware Tools 6.0.3 build-80004 for Linux for this running
kernel completed successfully.
You must restart your X session before any mouse or graphics changes take
effect.
You can now run VMware Tools by invoking the following command:
"/usr/bin/vmware-toolbox" during an X server session.
To use the vmxnet driver, restart networking using the following commands:
/etc/init.d/network stop
rmmod pcnet32
rmmod vmxnet
modprobe vmxnet
/etc/init.d/network start
To make use of the virtual printer, you will need to restart the CUPS service
Enjoy,
--the VMware team
A previous installation of VMware Tools has been detected.
The previous installation was made by the tar installer (version 4).
Keeping the tar4 installer database format.
Uninstalling the tar installation of VMware Tools.
Stopping VMware Tools services in the virtual machine:
Guest operating system daemon: [确定]
Guest memory manager: [确定]
关闭环回接口： [确定]
Guest vmxnet fast network device: [确定]
File /etc/X11/xorg.conf is backed up to /etc/X11/xorg.conf.old.1.
The removal of VMware Tools 6.0.3 build-80004 for Linux completed successfully.
Thank you for having tried this software.
Installing VMware Tools.
In which directory do you want to install the binary files?
[/usr/bin]
What is the directory that contains the init directories (rc0.d/ to rc6.d/)?
[/etc/rc.d]
What is the directory that contains the init scripts?
[/etc/rc.d/init.d]
In which directory do you want to install the daemon files?
[/usr/sbin]
In which directory do you want to install the library files?
[/usr/lib/vmware-tools]
The path "/usr/lib/vmware-tools" does not exist currently. This program is
going to create it, including needed parent directories. Is this what you want?
[yes]
In which directory do you want to install the documentation files?
[/usr/share/doc/vmware-tools]
The path "/usr/share/doc/vmware-tools" does not exist currently. This program
is going to create it, including needed parent directories. Is this what you
want? [yes]
The installation of VMware Tools 6.0.3 build-80004 for Linux completed
successfully. You can decide to remove this software from your system at any
time by invoking the following command: "/usr/bin/vmware-uninstall-tools.pl".
Before running VMware Tools for the first time, you need to configure it by
invoking the following command: "/usr/bin/vmware-config-tools.pl". Do you want
this program to invoke the command for you now? [yes]
Stopping VMware Tools services in the virtual machine:
Guest operating system daemon: [确定]
Guest memory manager: [确定]
关闭环回接口： [确定]
Guest vmxnet fast network device: [确定]
Trying to find a suitable vmmemctl module for your running kernel.
None of the pre-built vmmemctl modules for VMware Tools is suitable for your
running kernel. Do you want this program to try to build the vmmemctl module
for your system (you need to have a C compiler installed on your system)?
[yes]
Using compiler "/usr/bin/gcc". Use environment variable CC to override.
What is the location of the directory of C header files that match your running
kernel? [/lib/modules/2.6.25.6-55.fc9.i686/build/include]
Extracting the sources of the vmmemctl module.
Building the vmmemctl module.
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-config6/vmmemctl-only'
make -C /lib/modules/2.6.25.6-55.fc9.i686/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: Entering directory `/usr/src/kernels/2.6.25.6-55.fc9.i686'
CC [M] /tmp/vmware-config6/vmmemctl-only/os.o
SHIPPED /tmp/vmware-config6/vmmemctl-only/vmmemctl1.o
LD [M] /tmp/vmware-config6/vmmemctl-only/vmmemctl.o
Building modules, stage 2.
MODPOST 1 modules
WARNING: could not find /tmp/vmware-config6/vmmemctl-only/.vmmemctl1.o.cmd for /tmp/vmware-config6/vmmemctl-only/vmmemctl1.o
CC /tmp/vmware-config6/vmmemctl-only/vmmemctl.mod.o
LD [M] /tmp/vmware-config6/vmmemctl-only/vmmemctl.ko
make[1]: Leaving directory `/usr/src/kernels/2.6.25.6-55.fc9.i686'
cp -f vmmemctl.ko ./../vmmemctl.o
make: Leaving directory `/tmp/vmware-config6/vmmemctl-only'
The module loads perfectly in the running kernel.
Trying to find a suitable vmhgfs module for your running kernel.
None of the pre-built vmhgfs modules for VMware Tools is suitable for your
running kernel. Do you want this program to try to build the vmhgfs module for
your system (you need to have a C compiler installed on your system)? [yes]
Extracting the sources of the vmhgfs module.
Building the vmhgfs module.
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-config6/vmhgfs-only'
make -C /lib/modules/2.6.25.6-55.fc9.i686/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: Entering directory `/usr/src/kernels/2.6.25.6-55.fc9.i686'
CC [M] /tmp/vmware-config6/vmhgfs-only/backdoor.o
CC [M] /tmp/vmware-config6/vmhgfs-only/backdoorGcc32.o
CC [M] /tmp/vmware-config6/vmhgfs-only/bdhandler.o
CC [M] /tmp/vmware-config6/vmhgfs-only/cpName.o
In file included from include/linux/string.h:11,
from /tmp/vmware-config6/vmhgfs-only/cpName.h:18,
from /tmp/vmware-config6/vmhgfs-only/cpName.c:18:
include/linux/types.h:40: 错误：与‘uintptr_t’类型冲突
/tmp/vmware-config6/vmhgfs-only/vm_basic_types.h:170: 错误：‘uintptr_t’的上一个声明在此
make[2]: *** [/tmp/vmware-config6/vmhgfs-only/cpName.o] 错误 1
make[1]: *** [_module_/tmp/vmware-config6/vmhgfs-only] 错误 2
make[1]: Leaving directory `/usr/src/kernels/2.6.25.6-55.fc9.i686'
make: *** [vmhgfs.ko] 错误 2
make: Leaving directory `/tmp/vmware-config6/vmhgfs-only'
Unable to build the vmhgfs module.
The filesystem driver (vmhgfs module) is used only for the shared folder
feature. The rest of the software provided by VMware Tools is designed to work
independently of this feature.
If you wish to have the shared folders feature, you can install the driver by
running vmware-config-tools.pl again after making sure that gcc, binutils, make
and the kernel sources for your running kernel are installed on your machine.
These packages are available on your distribution's installation CD.
[ Press Enter key to continue ]
Trying to find a suitable vmxnet module for your running kernel.
None of the pre-built vmxnet modules for VMware Tools is suitable for your
running kernel. Do you want this program to try to build the vmxnet module for
your system (you need to have a C compiler installed on your system)? [yes]
Extracting the sources of the vmxnet module.
Building the vmxnet module.
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-config7/vmxnet-only'
make -C /lib/modules/2.6.25.6-55.fc9.i686/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: Entering directory `/usr/src/kernels/2.6.25.6-55.fc9.i686'
CC [M] /tmp/vmware-config7/vmxnet-only/vmxnet.o
Building modules, stage 2.
MODPOST 1 modules
CC /tmp/vmware-config7/vmxnet-only/vmxnet.mod.o
LD [M] /tmp/vmware-config7/vmxnet-only/vmxnet.ko
make[1]: Leaving directory `/usr/src/kernels/2.6.25.6-55.fc9.i686'
cp -f vmxnet.ko ./../vmxnet.o
make: Leaving directory `/tmp/vmware-config7/vmxnet-only'
The module loads perfectly in the running kernel.
Trying to find a suitable vmblock module for your running kernel.
None of the pre-built vmblock modules for VMware Tools is suitable for your
running kernel. Do you want this program to try to build the vmblock module
for your system (you need to have a C compiler installed on your system)?
[yes]
Extracting the sources of the vmblock module.
Building the vmblock module.
Using 2.6.x kernel build system.
make: Entering directory `/tmp/vmware-config7/vmblock-only'
make -C /lib/modules/2.6.25.6-55.fc9.i686/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules
make[1]: Entering directory `/usr/src/kernels/2.6.25.6-55.fc9.i686'
CC [M] /tmp/vmware-config7/vmblock-only/linux/block.o
CC [M] /tmp/vmware-config7/vmblock-only/linux/control.o
CC [M] /tmp/vmware-config7/vmblock-only/linux/dbllnklst.o
CC [M] /tmp/vmware-config7/vmblock-only/linux/dentry.o
/tmp/vmware-config7/vmblock-only/linux/dentry.c: 在函数‘DentryOpRevalidate’中:
/tmp/vmware-config7/vmblock-only/linux/dentry.c:101: 错误：‘struct nameidata’没有名为‘dentry’的成员
/tmp/vmware-config7/vmblock-only/linux/dentry.c:101: 错误：‘struct nameidata’没有名为‘dentry’的成员
/tmp/vmware-config7/vmblock-only/linux/dentry.c:102: 错误：隐式声明函数‘path_release’
make[2]: *** [/tmp/vmware-config7/vmblock-only/linux/dentry.o] 错误 1
make[1]: *** [_module_/tmp/vmware-config7/vmblock-only] 错误 2
make[1]: Leaving directory `/usr/src/kernels/2.6.25.6-55.fc9.i686'
make: *** [vmblock.ko] 错误 2
make: Leaving directory `/tmp/vmware-config7/vmblock-only'
Unable to build the vmblock module.
The vmblock module enables dragging or copying files from within a host and
dropping or pasting them onto your guest (host to guest drag and drop and file
copy/paste). The rest of the software provided by VMware Tools is designed to
work independently of this feature (including guest to host drag and drop and
file copy/paste).
If you would like the host to guest drag and drop and file copy/paste features,
you can install the driver by running vmware-config-tools.pl again after making
sure that gcc, binutils, make and the kernel sources for your running kernel
are installed on your machine. These packages are available on your
distribution's installation CD.
[ Press Enter key to continue ]
[EXPERIMENTAL] The Virtual Machine Communication Interface (VMCI) service
provides a new communication capability with the Host, primarily for
development at the moment. Would you like to enable this feature? [no]
Detected X.org version 0.0.0.
No drivers for X.org version: 0.0.0.
Do you want to change the display size that X starts with? (yes/no) [no]
Starting VMware Tools services in the virtual machine:
Switching to guest configuration: [确定]
Guest memory manager: [确定]
Guest vmxnet fast network device: [确定]
DMA setup: [确定]
Guest operating system daemon: [确定]
The configuration of VMware Tools 6.0.3 build-80004 for Linux for this running
kernel completed successfully.
You must restart your X session before any mouse or graphics changes take
effect.
You can now run VMware Tools by invoking the following command:
"/usr/bin/vmware-toolbox" during an X server session.
To use the vmxnet driver, restart networking using the following commands:
/etc/init.d/network stop
rmmod pcnet32
rmmod vmxnet
modprobe vmxnet
/etc/init.d/network start
To make use of the virtual printer, you will need to restart the CUPS service
Enjoy,
--the VMware team
以上是安装VMware Tools 6.0.3 build-80004 for Linux 的记录！希望有所帮助 |
沙发
2014-2-27 10:59:46
回复(0)
收起回复
|
简体中文
英语
日语
韩语
法语
西班牙语
越南语
泰语
阿拉伯语
俄语
葡萄牙语
德语
意大利语
希腊语
荷兰语
波兰语
保加利亚语
爱沙尼亚语
丹麦语
芬兰语
捷克语
罗马尼亚语
斯洛文尼亚语
瑞典语
匈牙利语
繁体中文
文言文
发表于 2014-2-27 10:58:50
置顶卡
喧嚣卡
变色卡
千斤顶
