CCIE RS WCCP 知识汇总

cq920103 · 发表于 2013-1-27 19:21:31

5.2 Embedded Event Manager

Configure 2 eem scripts one for enabling ospf debug if the ospf neighborship of R3 goes down.

Configure R3 with event manger applet “ENABLE_OSPF_DEBUG” when the ospf adjacency goes down to R5 ,
It should enable the “debug ip ospf event” and “debug ip ospf adj”
Configure another EEM applet “ DISABLE_OSPF_DEBUG” when OSPF neighbor ship comes up with R5. It should disable all the debug messages.
Make sure that each event generates a syslog message with a priority of 6 that shows the name of the event being activated.
These logs should be seen both in the console and in the log buffer.
You MUST be able to have these events run on R3 when R5 bounces its interface.

www封行 · 发表于 2013-1-27 22:49:06

js小毅 · 发表于 2013-1-28 09:18:22

yangzj · 发表于 2013-1-29 05:13:46

看了LZ的帖子，我只想说一句很好很强大！

gzcongzi · 发表于 2013-1-30 10:42:31

收藏了··WCCP一直没有学好

cuma5200 · 发表于 2013-2-1 19:12:15

需要這知識

单臂路由 · 发表于 2013-2-1 20:45:53

多谢斑竹~

mickeymichael · 发表于 2013-2-4 22:34:23

zhaoyu0886 · 发表于 2013-2-6 19:06:53

我好像有了这个了呢

nighttale · 发表于 2013-2-6 23:57:10

huohuosld · 发表于 2013-2-7 11:37:16

学习学习，多谢楼主分享

xjwanghenry · 发表于 2013-2-8 23:58:33

感谢分享

121oio · 发表于 2013-2-12 09:43:54

看看啊。。。

adrian518 · 发表于 2013-2-13 13:00:09

starok5697 · 发表于 2013-2-15 23:22:07

求共享

账号		自动登录	找回密码
密码			论坛注册

CCIE RS WCCP 知识汇总

浏览过的版块

客服中心

投诉建议