Cisco show interface 命令详解

COCO999

Router#show interfaces e4/0
Ethernet4/0 is up, line protocol is up
Hardware is Lance, address is 000b.bf30.f470 (bia 000b.bf30.f470)
Internet address is 1.1.1.9/24
MTU 1500 bytes, BW 10000 Kbit, RxBW 5000 Kbit, DLY 1000 usec,
reliability 255/255, txload 1/255, rxload 254/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:00, output 00:00:01, output hang never
Last clearing of "show interface" counters 00:03:36
Input queue: 34/75/0/819 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 7138000 bits/sec, 14870 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
3109298 packets input, 186557880 bytes, 0 no buffer
Received 217 broadcasts, 0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 input packets with dribble condition detected
22 packets output, 1320 bytes, 0 underruns
11 output errors, 26 collisions, 0 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier
0 output buffer failures, 0 output buffers swapped out




Cisco show interface 命令详解.zip (322.93 KB, 下载次数: 77)

2011-9-1 15:00 上传

点击文件名下载附件

该贴已经同步到 COCO999的微博

COCO999

iook163

谢谢分享

royalsheng

多谢分享！{:soso_e100:}

royalsheng

好东西！

ashuang

cec