ＨＣＩＡ实验ＯＳＰＦ命令

acscs

The device is running!

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]un in e
Info: Information center is disabled.
[Huawei]int g 0/0/0
[Huawei-GigabitEthernet0/0/0]ip ad 1.1.1.1 24
[Huawei-GigabitEthernet0/0/0]q
[Huawei] ospf 1
[Huawei-ospf-1]rou       
[Huawei-ospf-1]a 0
[Huawei-ospf-1-area-0.0.0.0]r       
[Huawei-ospf-1-area-0.0.0.0]ro       
[Huawei-ospf-1-area-0.0.0.0]n       
[Huawei-ospf-1-area-0.0.0.0]net       
[Huawei-ospf-1-area-0.0.0.0]network  1.1.1.1 24
                                             ^
Error: Wrong parameter found at '^' position.
[Huawei-ospf-1-area-0.0.0.0]network 1.1.1.1 0.0.0.255
[Huawei-ospf-1-area-0.0.0.0]q
[Huawei-ospf-1]q\
               ^
Error: Unrecognized command found at '^' position.
[Huawei-ospf-1]q
[Huawei]dis ospf peer

         OSPF Process 1 with Router ID 1.1.1.1
                 Neighbors

Area 0.0.0.0 interface 1.1.1.1(GigabitEthernet0/0/0)'s neighbors
Router ID: 2.2.2.2          Address: 1.1.1.2         
   State: Full  Mode:Nbr is  Master  Priority: 1
   DR: 1.1.1.1  BDR: 1.1.1.2  MTU: 0   
   Dead timer due in 40  sec
   Retrans timer interval: 5
   Neighbor is up for 00:00:10     
   Authentication Sequence: [ 0 ]

[Huawei]

  Please check whether system data has been changed, and save data in time

  Configuration console time out, please press any key to log on

<Huawei>

whx991021

谢谢大佬分享，非常有用，共同进步，学习学习

shangd

谢谢无偿献血！

CHT5011

zjd612

感谢楼主分享

nihoama123

多熟练联系