|
发表于 2021-5-24 19:36:41
|
显示全部楼层
dicky_wong617:When configuring Control Plane Policing on a router to protect it from malicious traffic, an engineer observes
that the configured routing protocols start flapping on that device. Which action in the Control Plane Policy
prevents this problem in a production environment while achieving the security objective?
A . Set the conform-action and exceed-action to transmit initially to test the ACLs and transmit rate and apply
the Control Plane Policy in the output direction
B. Set the conform-action and exceed-action to transmit initially to test the ACLs and transmit rate and apply
the Control Plane Policy in the input direction
C. Set the conform-action to transmit and exceed-action to drop to test the ACLs and transmit rate and apply
the Control Plane Policy in the output direction
D. Set the conform-action to transmit and exceed-action to drop to test the ACLs and transmit rate and apply
the Control Plane Policy in the input direction
題庫正確答案系B定系D ,我認為系in the input direction ,系不明白drop to test同transmit initially to test ACL有甚麽分別,請給意見及解題,感謝感謝!!
|
地板
2021-5-24 19:36:41
回复(0)
收起回复
|