先注册再绑定QQ
初级工程师
使用道具 举报
Passive : Enables LACP only when an LACP device is detected. This is the default state.
But the default channel mode is ON when all EtherChannels that are not running LACP remain in this mode.
https://www.cisco.com/c/m/en_us/techdoc/dc/reference/cli/nxos/commands/l2/channel-group-ethernet.html
davidsonemo 发表于 2019-4-17 21:16 When is configured, the default mode is PASSIVE The right answer is D. More information : https:// ...
本版积分规则 发表回复 回帖并转播 回帖后跳转到最后一页
|Archiver|手机版|小黑屋|sitemap|鸿鹄论坛 ( 京ICP备14027439号 )
GMT+8, 2025-2-10 14:02 , Processed in 0.064156 second(s), 15 queries , Redis On.
Powered by Discuz!
© 2001-2025 HH010.COM