詢問一下一些題目的正確答案~

samsung1001226

When Unicast Reverse Path Forwarding is configured on an interface, which action does the interface take first when it receives a packet?

A. It checks the ingress access lists

B. It verifies a reverse path via the FIB to the source

C. It checks the egress access lists

D. It verifies that the source has a valid CEF adjacency

& f, A' a! C' @6 j! [

Regarding a diagram with 3 routers (H1(with IPv6 IP and Loopback 1.1.1.1) +R1 (with IP IPv6 and Loopback
2.2.2.2) +R2 (with IP IPv6 and Loopback 3.3.3.3)
2 o, u$ k* {$ H. r: j. u2 ~running with EIGRP 100 on both routers and what command you will implement so that you will see the loopback IP of R2 to be advertised at H1

A.  H1(config t)#router eigrp 100
' a4 M# n6 [) q9 |, c3 r    H1(config t)#no stub only

B.  R2(config t)#router eigrp 100
1 A8 e# y+ R8 e3 y    R2(config t)#no stub receive only

C. H1(config t)#ipv6 router eigrp 100
7 i$ e5 O3 I* }7 A0 E) g) d/ c    H1(config t)#no stub only

D. R2(config t)#ipv6 router eigrp 100
    R2(config t)#no stub only

% k9 m% }' Z! i3 k

hofriendly

B. It verifies a reverse path via the FIB to the source

3 j. u" b6 n1 D9 r; I" fA.  H1(config t)#router eigrp 100
    H1(config t)#no stub only

griffin147