网络中当VLAN划分好后发现IP地址不够用时怎么办

已然

在校园网搭建过程中，已经把VLAN和其他网络划分好了，突然发现每个VLAN中的地址不够用，这时怎么办呢？

thegreek1

使用vrf-lite, add a new address block, if the traffic only goes one way, then you could use a dynamic NAT with the override syntax. Create a NAT of equal size with each vlan. this  in essense is a 1 to 1 nat

khoatrang123456

I think you can used IP v.6

ackca

PAT

linqi007

VLAN配置second IP

thegreek1

You could also route a new subnet to the vlan

已然

有没有具体的方法呀