hcna的smart-link回切断线

12887455@qq.com

问题:pc1  ping pc2 -t 在smart -link断线回切后,就不通了
配置如下:
LSW1:
smart-link group 1
restore enable
smart-link enable
port GigabitEthernet0/0/1 master
port GigabitEthernet0/0/2 slave
timer wtr 30
flush send control-vlan 10 password simple 10
#
端口下stp dis

LSW2,LSW3,LSW4的配置一样:
interface GigabitEthernet0/0/2
stp disable
smart-link flush receive control-vlan 10 password simple 10
#