junier mip无法映射出去

呵呵大家好

以下是我的配置，型号是SSG140_SH 例如我的公网接口IP是113.105.76.1/27     MIP地址是113.105.76.11        
内网电脑172.16.86.128    可以上外网，8080端口内网测试正常，但是映射一直不成功

set service "wx-test-tcp 8080" protocol tcp src-port 0-65535 dst-port 8080-8080
set service "wx-test-tcp 8080" + udp src-port 0-65535 dst-port 8080-8080
set service "wx-test-tcp 8080" + udp src-port 0-65535 dst-port 3389-3389
set service "wx-test-tcp 8080" + tcp src-port 0-65535 dst-port 3389-3389


set interface "bgroup0/2" mip 113.105.76.11 host 172.16.86.128 netmask 255.255.255.255 vr "trust-vr"
set policy id 9 from "Untrust" to "DMZ"  "Any" "Any" "ANY" deny
set policy id 9 disable
set policy id 9
exit
set policy id 10 from "Trust" to "Trust"  "Any" "Any" "ANY" permit
set policy id 10
exit
set policy id 18 from "Trust" to "Untrust"  "Any" "Any" "ANY" deny log
set policy id 18
exit
set policy id 81 from "Untrust" to "Trust"  "Any" "MIP(113.105.76.11)" "wx-test-tcp 8080" permit notify-conn-close log count alarm 180000 1080 sess-limit per-src-ip 10 traffic gbw 200 pbw 200
set policy id 81

呵呵大家好

没人么