关于NP交换实验，为什么我的IOS不能做VTP的实验？

ccnafasttrack

在全局配置模式下使用vtp domain，根本没有这个命令呢？ESW1#conf
Configuring from terminal, memory, or network [terminal]?
Enter configuration commands, one per line.  End with CNTL/Z.
ESW1(config)#vtp do
ESW1(config)#vtp do?
% Unrecognized command
ESW1(config)#vtp domain ?
% Unrecognized command
ESW1(config)#vtp ?      
  file   Configure IFS filesystem file where VTP configuration is stored.
  if-id  Configure interface as the preferred source for the VTP IP updater
         address.

ESW1(config)#vtp file ?
  WORD  The ascii name of the IFS filesystem file where VTP configuration is
        stored.

ESW1(config)#vtp vtp ?
% Unrecognized command
ESW1(config)#vtp ?      
  file   Configure IFS filesystem file where VTP configuration is stored.
  if-id  Configure interface as the preferred source for the VTP IP updater
         address.

ESW1(config)#vtp

这个是IOS版本：
ESW1#show version
Cisco IOS Software, 3600 Software (C3660-TELCOENTK9-M), Version 12.4(13b), RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Tue 24-Apr-07 21:18 by prod_rel_team

ROM: ROMMON Emulation Microcode
ROM: 3600 Software (C3660-TELCOENTK9-M), Version 12.4(13b), RELEASE SOFTWARE (fc3)

ESW1 uptime is 1 minute
System returned to ROM by unknown reload cause - suspect boot_data[BOOT_COUNT] 0x0, BOOT_COUNT 0, BOOTDATA 19
System image file is "tftp://255.255.255.255/unknown"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
--More--

如果大家有好用的可以做NP实验的IOS，麻烦可以提供一个

aa9631230

我真是服了
还有不能做单臂路由的   你配置有问题吧
gns3 单臂都不能做了   那干脆下架算了

shenka

交换实验推荐用IOU做，GNS3会有问题。如果只是简单实验，Cisco Packet Tracer也可以。昨天我用gns3做单臂路由也不行

Rockyw

shenka 发表于 2016-7-8 09:45
交换实验推荐用IOU做，GNS3会有问题。如果只是简单实验，Cisco Packet Tracer也可以。昨天我用gns3做单臂路 ...

这个应该也是配置有问题，检查一下吧