LACP 试验 命令后出现 EC-5 正常吗
SwitchA(config-if-range)#channel-group 1 mode active
SwitchA(config-if-range)# Creating a port-channel interface Port-channel 1
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/3, changed state to down
%EC-5-CANNOT_BUNDLE2: Fa0/3 is not compatible with Po1 and will be suspended (vlan mask is different)
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/4, changed state to down
%EC-5-CANNOT_BUNDLE2: Fa0/4 is not compatible with Po1 and will be suspended (vlan mask is different) |