300-101路由实验route-map验证

langshuo

说是在test路由器上做测试,怎么用路由器发http包?验证的话是在中转路由器上debug么?求教,谢谢

dingjerry

1) 考试中我记得是有PC可以让你浏览网站发HTTP流量的。

2）有命令可以看是否触发了route-map （其实是access list啦）。  

你就不能自己看看题库吗？  本站上有题库啊，解释的很详细啊

langshuo

dingjerry 发表于 2016-3-3 03:05
1) 考试中我记得是有PC可以让你浏览网站发HTTP流量的。

2）有命令可以看是否触发了route-map （其实是ac ...

题库只讲了主路由器的配置,关于验证一点没提,我是看了题库之后不明白才来提问的

dingjerry

langshuo 发表于 2016-3-3 04:53
题库只讲了主路由器的配置,关于验证一点没提,我是看了题库之后不明白才来提问的

那你到这个网站看看：

“ http://www.digitaltut.com/route-policy-based-routing-sim ”

4) There is a “Host for Testing”, click on this host to open a box in which there is a button named “Generate HTTP traffic”. Click on this button to generate some packets for HTTP traffic. Jump back to the BorderRouter and type the command “show route-map”.

BorderRouter#show route-map

In the output you will see the line “Policy routing matches: 9 packets…”. It means that the route-map we configured is working properly.

dingjerry

langshuo 发表于 2016-3-3 04:53
题库只讲了主路由器的配置,关于验证一点没提,我是看了题库之后不明白才来提问的

那你看看这里 ：

h t t p://w w w.digitaltut.com/route-policy-based-routing-sim

4) There is a “Host for Testing”, click on this host to open a box in which there is a button named “Generate HTTP traffic”. Click on this button to generate some packets for HTTP traffic. Jump back to the BorderRouter and type the command “show route-map”.

BorderRouter#show route-map

In the output you will see the line “Policy routing matches: 9 packets…”. It means that the route-map we configured is working properly.

dingjerry

langshuo 发表于 2016-3-3 04:53
题库只讲了主路由器的配置,关于验证一点没提,我是看了题库之后不明白才来提问的

看这里：

w w w . digitaltut.com/route-policy-based-routing-sim


4) There is a “Host for Testing”, click on this host to open a box in which there is a button named “Generate HTTP traffic”. Click on this button to generate some packets for HTTP traffic. Jump back to the BorderRouter and type the command “show route-map”.

BorderRouter#show route-map

In the output you will see the line “Policy routing matches: 9 packets…”. It means that the route-map we configured is working properly.

dingjerry

langshuo 发表于 2016-3-3 04:53
题库只讲了主路由器的配置,关于验证一点没提,我是看了题库之后不明白才来提问的

给你发了点东西，但是要审核。  不知道多久才会显示出来。大体就是下面说的:

4) There is a “Host for Testing”, click on this host to open a box in which there is a button named “Generate H T T P traffic”. Click on this button to generate some packets for H T T P traffic. Jump back to the BorderRouter and type the command “show route-map”.

BorderRouter#show route-map

In the output you will see the line “Policy routing matches: 9 packets…”. It means that the route-map we configured is working properly.

dingjerry

langshuo 发表于 2016-3-3 04:53
题库只讲了主路由器的配置,关于验证一点没提,我是看了题库之后不明白才来提问的

给你回复了点东西，但是不知道什么内容触发了审核，只能等了， 不知道要多久。