AIR-AP1131G-E-K9 Flash无法启动,请问一下，怎么解决这问题。

cfhjoe

flash显示0，用tftp安装无法连接Tftp服务器。请问一下，怎么解决这问题。
p: Xmodem file system is available.
flashfs[0]: unable to allocate available block.

The system has been interrupted, or encountered an error
during initializion of the flash filesystem.  The following
commands will initialize the flash filesystem, and finish
loading the operating system software:

    flash_init
    ether_init
    tftp_init
    boot


ap: set
配置IP地址但无效
ap: set IP_ADDR 10.0.0.1
flash:/env_vars.tmp: invalid argument
The filesystem containing the variables may not be initialized yet.

ap: set NETMASK 255.255.255.0
flash:/env_vars.tmp: invalid argument
The filesystem containing the variables may not be initialized yet.

ap: set DEFAULT_ROUTER 10.0.0.2
flash:/env_vars.tmp: invalid argument
The filesystem containing the variables may not be initialized yet.

ap: set
DEFAULT_ROUTER=10.0.0.2
IP_ADDR=10.0.0.2
NETMASK=255.255.255.0

tftp进程正常
ap: tftp_init
tftp_init success: You can now use tftp file system!
连接tftp服务器地址，出现超时
ap: tar -xtract tftp://10.0.0.2/c1130-k9w7-tar.123-11.JA4.tar flash:
tftp://10.0.0.2/c1130-k9w7-tar.123-11.JA4: connection timed out

klinuxe

准备好IOS，一定要是指定的文件名，配置好TFTP和IP地址。按住AP重置键，插上电源，知道终端显示松开，就可以了

jsntrgzxy

我现在刷这个ap也遇到刷不进

、Huang╮

AP挂了，报修吧