设为首页收藏本站language 语言切换
查看: 2757|回复: 1
收起左侧

[求助] H3C msr路由器nat经常失效

[复制链接]
发表于 2014-8-25 00:25:12 | 显示全部楼层 |阅读模式
H3C的msr20-20路由器,做了一些nat的设置:
static :x.x.x.99服务器 映射 y.y.y.19
server:x.x.x.101:80 映射 y.y.y.20:5001
             x.x.x.102:80 映射 y.y.y.20:5002
  一直到 x.x.x.108:80 映射 y.y.y.20:5008
路由器出口地址y.y.y.18,运营商端地址y.y.y.17

刚做完时正常,外网可ping通y.y.y.19,浏览器可访问映射的其它设备,应用也正常。
随后就发生了应用全断的问题,外网ping y.y.y.19不通,查看路由器配置未变,但
[]dis nat sess

No NAT sessions are currently active!
[]dis nat static
NAT static information:
  There are currently 1 NAT static configuration(s)
  single static:
    Local-IP        : x.x.x.99
    Global-IP       : y.y.y.19
    Local-VPN       : ---
    Global-VPN      : ---

NAT static enabled information:
  Interface                                      Direction
  Ethernet0/0                                    out-static
[]dis nat server
NAT server in private network information:
  There are currently 8 internal server(s)
  Interface: Ethernet0/0, Protocol: 6(tcp)
    Global:    y.y.y.20 : 5001
    Local :  x.x.x.101 : 80(www)

  Interface: Ethernet0/0, Protocol: 6(tcp)
    Global:    y.y.y.20 : 5002
    Local :  x.x.x.102 : 80(www)
…………

从x.x.x.99服务器 ping外网,该通的照样不通,但可见nat条目
[]dis nat sess

There are currently 2 NAT sessions:

Pro    GlobalAddrort        LocalAddrort         DestAddrort
-      y.y.y.19                   x.x.x.99          ---
       status: 800            TTL: 00:05:00          Left: 00:04:50

ICMP   y.y.y.19:20491     x.x.x.99:20491    8.8.8.8:20491
       status: 9              TTL: 00:00:10          Left: 00:00:01

打h3c的400,建议升级版本,升了之后,与其它站点版本都相同,问题依旧。重启设备无效,删除全部nat配置,重启设备再配,无效。

临时解决方法:
把路由器出口地址由.18改为.19,再改回.18,服务器与外网通;把.18改为.20再改回.18,映射的其它设备都可用浏览器访问。大约半天后,故障再次发生,如此循环。

不知原因为何?是路由器设备问题,还是运营商?我总觉得是运营商的问题。
有20多个站点用相同的配置模板,只有ip地址不同,应该不是配置的问题。
您需要登录后才可以回帖 登录 | 论坛注册

本版积分规则

QQ|Archiver|手机版|小黑屋|sitemap|鸿鹄论坛 ( 京ICP备14027439号 )  

GMT+8, 2025-5-8 13:14 , Processed in 0.133844 second(s), 27 queries , Redis On.  

  Powered by Discuz!

  © 2001-2025 HH010.COM

快速回复 返回顶部 返回列表