本帖最后由 jidog 于 2015-12-17 10:46 编辑
APd0d0.fdbc.e1a0>show version
Cisco IOS Software, C1130 Software (C1130-K9W8-M), Version 12.4(21a)JHB1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by Cisco Systems, Inc.
Compiled Wed 11-Aug-10 15:39 by prod_rel_team
ROM: Bootstrap program is C1130 boot loader
BOOTLDR: C1130 Boot Loader (C1130-BOOT-M) Version 12.3(8)JEA, RELEASE SOFTWARE (fc2)
APd0d0.fdbc.e1a0 uptime is 32 minutes
System returned to ROM by power-on
System image file is "flash:/c1130-k9w8-mx.124-21a.JHB1/c1130-k9w8-mx.124-21a.JHB1"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
export@cisco.com.
cisco AIR-LAP1131AG-C-K9 (PowerPCElvis) processor (revision B0) with 24566K/8192K bytes of memory.
Processor board ID FCW1431V0JL
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on
LWAPP image version 6.0.199.4
1 FastEthernet interface
2 802.11 Radio(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: D0 0:FD:BC:E1:A0
Part Number : 73-8962-14
PCA Assembly Number : 800-24818-13
PCA Revision Number : A0
PCB Serial Number : FOC142922S6
Top Assembly Part Number : 800-29144-03
Top Assembly Serial Number : FCW1431V0JL
Top Revision Number : A0
Product/Model Number : AIR-LAP1131AG-C-K9
Configuration register is 0xF
C1130-K9W8-M是瘦AP,无法进行配置。
如果想升级成胖AP需要下载胖AP的镜像。
C1130-k9w7-tar.124-10b.JDA3.tar
刷新成功之后,
这时,可以进入配置模式。 Enter configuration commands, one perline. End with CNTL/Z. ap(config)# ap(config)#interface bVI 1 ap(config-if)#ip address 10.41.0.81255.255.255.0 ap(config-if)#no shutdown ap#write
|