Dell(TM) PowerEdge(TM) R710 6.1.0 11/07/2011

TiGi

本帖最后由 TiGi 于 12-8-2011 07:25 编辑
ftp://ftp.dell.com/FOLDER0017633 ... NTVM_WN32_6.1.0.EXE
DELL INC.
BIOS RELEASE NOTES
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
System:         Dell(TM) PowerEdge(TM) R710
Version:        6.1.0
Release Date:   11/07/2011
_____________________
* Updated Intel Xeon Processor 5600 Series B1 stepping microcode (Patch ID=0x15).
* Updated BIOS ACM (Authentication Code Module) to revision 1.3 and SINIT ACM to revision 1.1.
* Corrected an issue where turbo mode was not being engaged when in Maximum Performance Mode.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
System:         Dell(TM) PowerEdge(TM) R710
Version:        6.0.7
Release Date:   08/30/2011
_____________________
* Updated MRC.
* Updated the iDRAC Configuration Utility.
* Enabled C state Auto Demotion capability.
* Corrected an issue where ESXi 5.0 failed to boot in UEFI boot mode.
* Removed the word "Integrated" from "Integrated Daughter Card" BIOS string.
* Added FlexAddressPlus support for uncommonly partitioned and configured CNA cards.
* Corrected an issue where Single Bit Errors were not being detected when Memory Mode was set to Advanced ECC Mode and Node Interleaving was disabled.
* Updated nested Power Profile dependencies.
* Corrected an issue where UEFI Boot Manager was displaying  multiple "EFI Fixed Disk boot device" string messages.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
System:         Dell(TM) PowerEdge(TM) R710
Version:        3.0.0
Release Date:   02/03/2011
_____________________
* Updated the embedded 5709 UEFI driver to version 6.2.0
* Added Support for Dell Lifecycle Controller 1.5
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
System:         Dell(TM) PowerEdge(TM) R710
Version:        2.3.12
Release Date:   02/01/2011
_____________________
* This update improves boot up and shutdown stability of systems running Windows Server 2008
SP2 with Hyper-V enabled.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
System:         Dell(TM) PowerEdge(TM) R710
Version:        2.2.11
Release Date:   01/05/2011
_____________________
***********************************************************************
*              IMPORTANT NOTE
*
* This BIOS update resolves an issue with a specific set of industry-standard
* memory DIMMs.  Certain DIMMs shipped between July and October 2010 are
* susceptible to increased levels of correctable Single Bit Errors. This issue is
* not unique to Dell servers. When this occurs, the system may display
* runtime error E2111. This BIOS update resolves the issue for the affected DIMMS.
*
* If you are experiencing an increase in occurrence of Single Bit Errors, this
* optional BIOS revision may resolve the situation.
* This optional BIOS modifies DIMM power management settings for specific
* configurations, only those with the potentially affected DIMMs, to eliminate the
* condition which can cause excessive errors. This BIOS may disable the
* Package C6 power state. Disabling the Package C6 power state results in
* increased system power consumption at system idle, but does not impact
* system runtime power consumption. The BIOS update will not modify DIMM power
* management for systems that do not have the affected DIMMs.
*
* If you are not experiencing this behavior with your system, you do not need to
* install this BIOS.
***********************************************************************

* This update resolves an issue with a specific set of industry-standard memory DIMMs which
may result in an elevated number of correctable memory errors while in system idle mode. These
errors are primarily exhibited as E2111 (correctable memory errors). This issue is
not unique to Dell servers and is resolved in this BIOS revision.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
System:         Dell(TM) PowerEdge(TM) R710
Version:        2.2.10
Release Date:   11/17/2010
_____________________
* Added support for an option to disable predictive memory failure reporting using the Deployment Toolkit.
* Added TXT-SX support
* Increased single-bit error logging threshold
* Ensure BIOS has enabled processor AES-NI before booting to the operating system.
* Updated the iDRAC Configuration Utility
* Updated the embedded 5709 UEFI driver to version 6.0.0
* Updated MRC
* Updated Intel(R) Xeon(R) Processor 5600 Series B1 stepping microcode (Patch ID=0x13)
* Added SR-IOV support
* Updated the embedded 5709C PXE/iSCSI option ROM to version 6.0.11
* Added support for additional memory configurations
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
System:         Dell(TM) PowerEdge(TM) R710
Version:        2.1.15
Release Date:   09/08/2010
_____________________
***********************************************************************
*              IMPORTANT NOTE
*
* This BIOS release includes a microcode update
* for the Intel Xeon processor 5600 series.
* Intel and Dell recommend applying the update as soon as possible.
*
***********************************************************************
* Updated Intel(R) Xeon(R) Processor 5600 Series B1 stepping microcode (Patch ID=0x10)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
System:         Dell(TM) PowerEdge(TM) R710
Version:        2.1.9
Release Date:   05/26/2010
_____________________
* Support for Lifecycle Controller 1.4
* Updated the embedded 5709C PXE/iSCSI option ROM to version 5.2.7
* Updated the embedded 5709C UEFI driver to version 5.2.13
* Updated UEFI drivers with certain fixes provided by the EFI Development Kit (EDK) between
        August 2009 and December 2009
* Updated the iDRAC Configuration Utility
* Added settings in SETUP for Intel (R) Xeon (R) Processor 5600 Series
* Added AES-NI display in SETUP for Intel (R) Xeon (R) Processor 5600 Series
* Updated CPU RC
* Updated MRC
* Updated chipset RC
* Updated chipset support
* Enabled Round robin redirection for logical mode in Intel (R) 5500/5600 Series Chipset
* Corrected an issue where, in a dual processor system, the Machine Check Error was
        logged as a CPU3 or CPU4 instead of CPU1 or CPU2.
* Corrected to prevent 3 DIMMs per channel from operating at 1.35V in Custom Power Profile mode.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
System:         Dell(TM) PowerEdge(TM) R710
Version:        2.0.13
Release Date:   04/07/2010
_____________________
***********************************************************************
*              IMPORTANT NOTE
*
* This update includes a recommended microcode update from Intel.  On a subset of
* Intel(R) Xeon (R) 5600 Series Processors there is an issue which may result in
* unpredictable system behavior.  
*
***********************************************************************
* Updated Intel (R) Xeon (R) Processor 5600 Series B1 stepping microcode to 0x0000000C
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
System:         Dell(TM) PowerEdge(TM) R710
Version:        2.0.11
Release Date:   03/02/2010
_____________________
* Added Intel (R) Xeon (R) Processor 5600 Series support
* Added memory sparing mode support (for the above processors)
* Added support for low voltage memory DIMMs (for the above processors)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
System:         Dell(TM) PowerEdge(TM) R710
Version:        1.3.6
Release Date:   11/04/2009
_____________________
* Updated UEFI drivers
* Improved Power Management performance for 揂ctive Power Controller

winxp2000

来这里发DELLR710的BIOS有什么意义？