如何进入boot模式，我始终都是0x2102

furion0303

Router#config t

Enter configuration commands, one per line.  End with CNTL/Z

Router(config)#config-register 0x2101

Router(config)#end

00:02:07: %SYS-5-CONFIG_I: Configured from console by console

Router#
Router#
00:03:01: %SYS-5-CONFIG_I: Configured from console by console
Router#sh ver
Cisco Internetwork Operating System Software
IOS (tm) 7200 Software (C7200-IK9O3S-M), Version 12.2(40a), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2007 by cisco Systems, Inc.
Compiled Sun 11-Mar-07 00:33 by pwade
Image text-base: 0x60008940, data-base: 0x6147A000
ROM: ROMMON Emulation Microcode
BOOTLDR: 7200 Software (C7200-IK9O3S-M), Version 12.2(40a), RELEASE SOFTWARE (fc1)
Router uptime is 3 minutes
System returned to ROM by unknown reload cause - suspect boot_data[BOOT_COUNT] 0x0, BOOT_COUNT 0, BOOTDATA 19
System image file is "tftp://255.255.255.255/unknown"

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:

If you require further assistance please contact us by sending email to
export@cisco.com.
cisco 7206VXR (NPE400) processor (revision A) with 81920K/16384K bytes of memory.
Processor board ID 4294967295
R7000 CPU at 150Mhz, Implementation 39, Rev 2.1, 256KB L2, 512KB L3 Cache
6 slot VXR midplane, Version 2.1
Last reset from power-on
Bridging software.
X.25 software, Version 3.0.0.
PCI bus mb0_mb1 (Slots 0, 1, 3 and 5) has a capacity of 600 bandwidth points.
Current configuration on bus mb0_mb1 has a total of 200 bandwidth points.
This configuration is within the PCI bus capacity and is supported.
PCI bus mb2 (Slots 2, 4, 6) has a capacity of 600 bandwidth points.
Current configuration on bus mb2 has a total of 0 bandwidth points
This configuration is within the PCI bus capacity and is supported.
Please refer to the following document "Cisco 7200 Series Port
Adaptor Hardware Configuration Guidelines" on CCO <>,
for c7200 bandwidth points oversubscription/usage guidelines.

1 FastEthernet/IEEE 802.3 interface(s)
125K bytes of non-volatile configuration memory.
65536K bytes of ATA PCMCIA card at slot 0 (Sector size 512 bytes).
8192K bytes of Flash internal SIMM (Sector size 256K).
Configuration register is 0x2102
Router#
Router#

Router#reload

结果始终是0x2102
帅哥帮助啊
无法进入boot模式

wesley

难题！

love-peace

试过了，没问题的呀！楼主再试试看吧

ynz317

感谢楼主