跟我学交换机配置(六)

老鬼

9.3.5 通过千兆以太网通道配置802.1Q中继示例
本节及以下各小节所介绍的中继配置示例适用于Catalyst 5000/4000家族、Catalyst 2926G/2926系列，以及Catalyst 2948G/2980G型号交换机。
本节所例举的示例显示了如何通过在两台兼容802.1Q（可使用“show port capabilities”命令查看你的硬件是否兼容802.1Q）的交换机间的千兆以太网通道配置802.1Q中继。
图9-12显示了两台交换机是通过4个1000BASE-SX千兆以太网端口连接的。

图9-12 通过以太钢通道形成中继链路示例
要配置交换机形成一个4端口千兆以太网通道绑定，并且配置这个千兆以太网通道为802.1Q中继链路，请按以下步骤进行。
（1）确保在Switch A和Switch B交换机中的所有端口分配到同一个VLAN中。这个VLAN是作为802.1Q中继的本地VLAN。在本示例中，是配置所有端口为VLAN 1成员。
Switch_A> (enable) set vlan 1 2/3-6
VLAN Mod/Ports
---- -----------------------
1 2/3-6
Switch_A> (enable)
Switch_B> (enable) set vlan 1 3/3-6
VLAN Mod/Ports
---- -----------------------
1 3/3-6
Switch_B> (enable)
（2）配置以太网通道中的一个端口去协商802.1Q中继。这一配置将自动应用到通道两端的所有端口上。本示例假设在Switch B上的端口是使用dot1q中继negotiate封装类型的auto模式。系统日志记录802.1Q中继建立信息。
Switch_A> (enable) set trunk 2/3 desirable dot1q
Port(s) 2/3-6 trunk mode set to desirable.
Port(s) 2/3-6 trunk type set to dot1q.
Switch_A> (enable) %DTP-5-TRUNKPORTONort 2/3 has become dot1q trunk
!—以下是自动在以太网通道其他端口中的应用配置过程
%DTP-5-TRUNKPORTONort 2/4 has become dot1q trunk
%ETHC-5-PORTFROMSTPort 2/3 left bridge port 2/3-6
%DTP-5-TRUNKPORTONort 2/5 has become dot1q trunk
%ETHC-5-PORTFROMSTPort 2/4 left bridge port 2/3-6
%ETHC-5-PORTFROMSTPort 2/5 left bridge port 2/3-6
%DTP-5-TRUNKPORTONort 2/6 has become dot1q trunk
%ETHC-5-PORTFROMSTPort 2/6 left bridge port 2/3-6
%ETHC-5-PORTFROMSTPort 2/3 left bridge port 2/3
%ETHC-5-PORTTOSTPort 2/3 joined bridge port 2/3-6
%ETHC-5-PORTTOSTPort 2/4 joined bridge port 2/3-6
%ETHC-5-PORTTOSTPort 2/5 joined bridge port 2/3-6
%ETHC-5-PORTTOSTPort 2/6 joined bridge port 2/3-6
Switch_B> (enable) %DTP-5-TRUNKPORTONort 3/3 has become dot1q trunk
%DTP-5-TRUNKPORTONort 3/4 has become dot1q trunk
%ETHC-5-PORTFROMSTPort 3/3 left bridge port 3/3-6
%ETHC-5-PORTFROMSTPort 3/4 left bridge port 3/3-6
%ETHC-5-PORTFROMSTPort 3/5 left bridge port 3/3-6
%ETHC-5-PORTFROMSTPort 3/6 left bridge port 3/3-6
%DTP-5-TRUNKPORTONort 3/5 has become dot1q trunk
%DTP-5-TRUNKPORTONort 3/6 has become dot1q trunk
%ETHC-5-PORTFROMSTPort 3/5 left bridge port 3/3-6
%ETHC-5-PORTFROMSTPort 3/6 left bridge port 3/3-6
%ETHC-5-PORTTOSTPort 3/3 joined bridge port 3/3-6
%ETHC-5-PORTTOSTPort 3/4 joined bridge port 3/3-6
%ETHC-5-PORTTOSTPort 3/5 joined bridge port 3/3-6
%ETHC-5-PORTTOSTPort 3/6 joined bridge port 3/3-6
（3）在802.1Q中继链路协商完成后，分别在两台交换机上键入“show trunk”命令来校验以上中继配置是否成功。
Switch_A> (enable) show trunk
Port Mode Encapsulation Status Native vlan
-------- ----------- ------------- ------------ -----------
2/3 desirable dot1q trunking 1
2/4 desirable dot1q trunking 1
2/5 desirable dot1q trunking 1
2/6 desirable dot1q trunking 1
Port Vlans allowed on trunk
-------- ---------------------------------------------------------------------
2/3 1-1005, 1025-4094
2/4 1-1005, 1025-4094
2/5 1-1005, 1025-4094
2/6 1-1005, 1025-4094
Port Vlans allowed and active in management domain
-------- ---------------------------------------------------------------------
2/3 1-1005, 1025-4094
2/4 1-1005, 1025-4094
2/5 1-1005, 1025-4094
2/6 1-1005, 1025-4094
Port Vlans in spanning tree forwarding state and not pruned
-------- ---------------------------------------------------------------------
2/3 1-1005, 1025-4094
2/4 1-1005, 1025-4094
2/5 1-1005, 1025-4094
2/6 1-1005, 1025-4094
Switch_A> (enable)
Switch_B> (enable) show trunk
Port Mode Encapsulation Status Native vlan
-------- ----------- ------------- ------------ -----------
3/3 auto dot1q trunking 1
3/4 auto dot1q trunking 1
3/5 auto dot1q trunking 1
3/6 auto dot1q trunking 1
Port Vlans allowed on trunk
-------- ---------------------------------------------------------------------
3/3 1-1005, 1025-4094
3/4 1-1005, 1025-4094
3/5 1-1005, 1025-4094
3/6 1-1005, 1025-4094


Port Vlans allowed and active in management domain
-------- ---------------------------------------------------------------------
3/3 1-1005, 1025-4094
3/4 1-1005, 1025-4094
3/5 1-1005, 1025-4094
3/6 1-1005, 1025-4094
Port Vlans in spanning tree forwarding state and not pruned
-------- ---------------------------------------------------------------------
3/3 1-1005, 1025-4094
3/4 1-1005, 1025-4094
3/5 1-1005, 1025-4094
3/6 1-1005, 1025-4094
Switch_B> (enable)
（4）分别在两台交换机上键入“show port channel”和“show trunk”命令，以确认交换机的端口通道配置和中继状态。
Switch_A> (enable) show port channel
No ports channelling
Switch_A> (enable) show trunk
No ports trunking.
Switch_A>(enable)
Switch_B>(enable) show port channel
No ports channelling
Switch_B>(enable) show trunk
No ports trunking.
Switch_B>(enable)
（5）配置Switch A上的端口协商邻居交换机Switch B绑定千兆以太网通道。这里只需要在一个交换机上进行配置，通道连接的另一交换机上的端口将自动配置。本示例假设Switch B上的端口是以太网通道auto模式，系统日志记录以太网通道绑定建立信息。
Switch_A>(enable) set port channel 2/3-6 desirable
Port(s) 2/3-6 channel mode set to desirable.
Switch_A>enable) %PAGP-5-PORTFROMSTPort 2/3 left bridge port 2/3
%ETHC-5-PORTFROMSTPort 2/4 left bridge port 2/4
%ETHC-5-PORTFROMSTPort 2/5 left bridge port 2/5
%ETHC-5-PORTFROMSTPort 2/6 left bridge port 2/6
%ETHC-5-PORTFROMSTPort 2/4 left bridge port 2/4
%ETHC-5-PORTFROMSTPort 2/5 left bridge port 2/5
%ETHC-5-PORTFROMSTPort 2/6 left bridge port 2/6
%ETHC-5-PORTFROMSTPort 2/3 left bridge port 2/3
%ETHC-5-PORTTOSTPort 2/3 joined bridge port 2/3-6
%ETHC-5-PORTTOSTPort 2/4 joined bridge port 2/3-6
%ETHC-5-PORTTOSTPort 2/5 joined bridge port 2/3-6
%ETHC-5-PORTTOSTPort 2/6 joined bridge port 2/3-6
!—以下是Switch_B自动的以太网通道配置过程
Switch_B>(enable) %PAGP-5-PORTFROMSTPort 3/3 left bridge port 3/3
%ETHC-5-PORTFROMSTPort 3/4 left bridge port 3/4
%ETHC-5-PORTFROMSTPort 3/5 left bridge port 3/5
%ETHC-5-PORTFROMSTPort 3/6 left bridge port 3/6
%ETHC-5-PORTFROMSTPort 3/4 left bridge port 3/4
%ETHC-5-PORTFROMSTPort 3/5 left bridge port 3/5
%ETHC-5-PORTFROMSTPort 3/6 left bridge port 3/6
%ETHC-5-PORTFROMSTPort 3/3 left bridge port 3/3
%ETHC-5-PORTTOSTPort 3/3 joined bridge port 3/3-6
%ETHC-5-PORTTOSTPort 3/4 joined bridge port 3/3-6
%ETHC-5-PORTTOSTPort 3/5 joined bridge port 3/3-6
%ETHC-5-PORTTOSTPort 3/6 joined bridge port 3/3-6
（6）在以太网通道绑定协商完成后，在两交换机上分别键入“show port channel”命令以校验以太钢通道配置是否协商成功。
Switch_A>(enable) show port channel
Port Status Channel Channel Neighbor Neighbor
mode status device port
----- ---------- --------- ----------- ------------------------- ----------
2/3 connected desirable channel WS-C4003 JAB023806(Sw 2/3
2/4 connected desirable channel WS-C4003 JAB023806(Sw 2/4
2/5 connected desirable channel WS-C4003 JAB023806(Sw 2/5
2/6 connected desirable channel WS-C4003 JAB023806(Sw 2/6
----- ---------- --------- ----------- ------------------------- ----------
Switch_A> (enable)
Switch_B> (enable) show port channel
Port Status Channel Channel Neighbor Neighbor
mode status device port
----- ---------- --------- ----------- ------------------------- ----------
3/3 connected auto channel WS-C4003 JAB023806(Sw 2/3
3/4 connected auto channel WS-C4003 JAB023806(Sw 2/4
3/5 connected auto channel WS-C4003 JAB023806(Sw 2/5
3/6 connected auto channel WS-C4003 JAB023806(Sw 2/6
----- ---------- --------- ----------- ------------------------- ----------
Switch_B>(enable)

yonglin

谁都不容易啊 ~~

xmxm76

自然法则.强者生存

星☆雨

应该加分

很有吸引力

＠乌鸦＠

顶!!!!!!!!!!

jco

早上的时候把硬盘线重新弄 了下

听听海

值得一下啊

茶丸星

我的妈呀，爱死你了

良思俊旭

佩服他们~!

alex_lxyz

谢谢谢谢谢谢

Loveju

c4919654

Rockyw

感谢楼主分享！

淼渺淼渺

感谢楼主分享