在神州数码路由器上做语音VOIP的实验问题

GFP618

dial-peer voice 1 pots
  destination-pattern 8002
  port 1/0
!
dial-peer voice 2 voip
  destination-pattern 8001
  session target ipv4: 192.168.1.2
我使用拨号对加语音模块实现两端通讯。
路由器的版本信息如下：
show ver
Digitalchina Internetwork Operating System Software
2650 Series Software, Version 1.3.3A (FULL), RELEASE SOFTWARE
Copyright (c) 1996-2004 by China Digitalchina CO.LTD
Compiled: 2007-12-29 13:57:03 by system, Image text-base: 0x6004
ROM: System Bootstrap, Version 0.4.3
Serial num:8IRT74117C27000002, ID num:015036
System image file is "DCR26V1.3.3A.bin"
DCR-2650 (PowerPC) Processor
65536K bytes of memory,8192K bytes of flash
R3 uptime is 0:00:14:29, The current time: 2002-01-01 00:14:29
Slot 0: SCC Slot
  Port 0: 10/100Mbps full-duplex Ethernet
  Port 1: 10/100Mbps full-duplex Ethernet
  Port 2: 2M full-duplex Serial
  Port 3: 2M full-duplex Serial
Slot 1: 2 FXS

GFP618

回帖请加配置，学习一下你的配置方法，并且验证一下，谢谢你的回答！

chen31980041

串行链路能通吗？还有另外一端的配置呢？

maqizhao

此贴必火,‘留’芳百世.