设为首页收藏本站language 语言切换
查看: 1915|回复: 0
收起左侧

企业核心设备的接口信息

[复制链接]
发表于 2011-6-8 08:37:15 | 显示全部楼层 |阅读模式
Ethernet2/0/5 current state : UP
IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 000f-e23f-44fe
The Maximum Transmit Unit is 1500
Media type is Optical fiber, loopback not set
Port hardware type is 100_BASE_SX_SFP
100Mbps-speed mode, Full-duplex mode
Link speed type is autonegotiation, Link duplex type is autonegotiation
Flow-control is not enabled
The Maximum Frame Length is 1536
Multicast-suppression pps: 100
Allow jumbo frame to pass
PVID: 5
Mdi type: auto
Port link-type: access
  Tagged   VLAN ID : none
  Untagged VLAN ID : 5
Last 100 seconds input:  41 packets/sec 12606 bytes/sec
Last 100 seconds output:  75 packets/sec 99145 bytes/sec
Input(total):  1021652243 packets, 234967147200 bytes
         - broadcasts, - multicasts
Input(normal):  1021652243 packets, - bytes
         3439712 broadcasts, 627611 multicasts
Input:  - input errors, 0 runts, - giants,  0 throttles, 0 CRC
         0 frame,  - overruns, - aborts, - ignored, - parity errors
Output(total): 686056898 packets, 593620287842 bytes
         - broadcasts, - multicasts, - pauses
Output(normal): 686056898 packets, - bytes
         933339 broadcasts, 97937 multicasts, 0 pauses
Output: 0 output errors,  - underruns, - buffer failures
         0 aborts, 0 deferred, 0 collisions, 0 late collisions
         - lost carrier, - no carrier


这是核心交换机的信息,怎么看他的接口流量,这里每一条是什么意思,谢谢各位。。。。
您需要登录后才可以回帖 登录 | 论坛注册

本版积分规则

QQ|Archiver|手机版|小黑屋|sitemap|鸿鹄论坛 ( 京ICP备14027439号 )  

GMT+8, 2025-6-27 10:08 , Processed in 0.079719 second(s), 22 queries , Redis On.  

  Powered by Discuz!

  © 2001-2025 HH010.COM

快速回复 返回顶部 返回列表