设为首页收藏本站language 语言切换
查看: 2326|回复: 6
收起左侧

[求助] 300-410,題庫問題,請教

[复制链接]
发表于 2021-5-23 17:39:33 | 显示全部楼层 |阅读模式
5鸿鹄币

QUESTION  In which two ways does the IPv6 First-Hop Security Binding Table operate? (Choose two.)
A. by the recovery mechanism to recover the binding table in the event of a device reboot
B. by IPv6 routing protocols to securely build neighborships without the need of authentication
C. by IPv6 HSRP to make sure neighbors are authenticated before being used as gateways
D. by various IPv6 guard features to validate the data link layer address
E. by storing hashed keys for IPsec tunnels for the built-in IPsec features

ANS.  A D

QUESTION


Bangkok is using ECMP to reach to the 192.168.5.0/24 network. The administrator must configure Bangkok in such a way that Telnet traffic from 192.168.3.0/24 and 192.168.4.0/24 networks uses the HongKong router as the preferred router.


Which set of configurations accomplishes this task?
A . access-list 101 permit tcp 192.168.3.0 0.0.0.255 192.168.5.0 0.0.0.255 eq 23
access-list 101 permit tcp 192.168.4.0 0.0.0.255 192.168.5.0 0.0.0.255 eq 23
route-map PBR1 permit 10
match ip address 101
set ip next-hop 172.18.1.2
interface Ethernet0/3
ip policy route-map PBR1


B . access-list 101 permit tcp 192.168.3.0 0.0.0.255 192.168.5.0 0.0.0.255 eq 23
access-list 101 permit tcp 192.168.4.0 0.0.0.255 192.168.5.0 0.0.0.255 eq 23
route-map PBR1 permit 10
match ip address 101
set ip next-hop 172.18.1.2
interface Ethernet0/1
ip policy route-map PBR1


C . access-list 101 permit tcp 192.168.3.0 0.0.0.255 192.168.5.0 0.0.0.255 eq 23
access-list 101 permit tcp 192.168.4.0 0.0.0.255 192.168.5.0 0.0.0.255 eq 23
!
route-map PBR1 permit 10
match ip address 101
set ip next-hop 172.18.1.2
!
interface Ethernet0/1
ip policy route-map PBR1


D . access-list 101 permit tcp 192.168.3.0 0.0.0.255 192.168.5.0 0.0.0.255 eq 23
access-list 101 permit tcp 192.168.4.0 0.0.0.255 192.168.5.0 0.0.0.255 eq 23
!
route-map PBR1 permit 10
match ip address 101
set ip next-hop 172.18.1.2
!
interface Ethernet0/3
ip policy route-map PBR1



ANS. A


QUESTION

Which two components are needed for a service provider to utilize the LVPN MPLS application?(Choose two.)
A. The P routers must be configured for MP-iBGP toward the PE routers
B. The P routers must be configured with RSVP.
C. The PE routers must be configured for MP-iBGP with other PE routers
D. The PE routers must be configured for MP-eBGP to connect to CEs
E. The P and PE routers must be configured with LDP or RSVP

ANS.A D

這三題有點不確定 想聽看看大家的看法



最佳答案

查看完整内容

Which two components are needed for a service provider to utilize the LVPN MPLS application?(Choose two.) A. The P routers must be configured for MP-iBGP toward the PE routers E.The P and PE routers must be configured with LDP or RSVP Reference: PE Router Use MPLS with P routers Distributes VPN routes using MP-iBGP session to othter PE routers Label learned through LDP OR RSVP
发表于 2021-5-23 17:39:34 | 显示全部楼层

ANSWER

Which two components are needed for a service provider to utilize the LVPN MPLS application?(Choose two.)

A. The P routers must be configured for MP-iBGP toward the PE routers
E.The P and PE routers must be configured with LDP or RSVP

Reference:

PE Router
Use MPLS with P routers
Distributes VPN routes using MP-iBGP session to othter PE routers

Label learned through LDP OR RSVP

沙发 2021-5-23 17:39:34 回复 收起回复
回复

使用道具 举报

发表于 2021-5-24 19:34:28 | 显示全部楼层
Which two components are needed for a service provider to utilize the LVPN MPLS application?(Choose two.)

見圖

ANS: A, E

Which two components are needed for a service provider to utilize the LVPN MPLS application?

Which two components are needed for a service provider to utilize the LVPN MPLS application?
VPN2.png
板凳 2021-5-24 19:34:28 回复 收起回复
回复

使用道具 举报

发表于 2021-5-24 19:36:41 | 显示全部楼层

dicky_wong617:When configuring Control Plane Policing on a router to protect it from malicious traffic, an engineer observes
that the configured routing protocols start flapping on that device. Which action in the Control Plane Policy
prevents this problem in a production environment while achieving the security objective?
A . Set the conform-action and exceed-action to transmit initially to test the ACLs and transmit rate and apply
the Control Plane Policy in the output direction
B. Set the conform-action and exceed-action to transmit initially to test the ACLs and transmit rate and apply
the Control Plane Policy in the input direction
C. Set the conform-action to transmit and exceed-action to drop to test the ACLs and transmit rate and apply
the Control Plane Policy in the output direction
D. Set the conform-action to transmit and exceed-action to drop to test the ACLs and transmit rate and apply
the Control Plane Policy in the input direction

題庫正確答案系B定系D ,我認為系in the input direction ,系不明白drop to test同transmit initially to test ACL有甚麽分別,請給意見及解題,感謝感謝!!
地板 2021-5-24 19:36:41 回复 收起回复
回复

使用道具 举报

发表于 2021-6-2 16:22:54 | 显示全部楼层
Thanks for sharing
5# 2021-6-2 16:22:54 回复 收起回复
回复

使用道具 举报

发表于 2021-6-8 01:33:52 | 显示全部楼层
thks
6# 2021-6-8 01:33:52 回复 收起回复
回复

使用道具 举报

发表于 2021-6-8 01:34:16 | 显示全部楼层

Thanks for sharing
7# 2021-6-8 01:34:16 回复 收起回复
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 论坛注册

本版积分规则

QQ|Archiver|手机版|小黑屋|sitemap|鸿鹄论坛 ( 京ICP备14027439号 )  

GMT+8, 2025-2-2 22:44 , Processed in 0.086144 second(s), 14 queries , Redis On.  

  Powered by Discuz!

  © 2001-2025 HH010.COM

快速回复 返回顶部 返回列表