|
发表于 2018-1-16 10:42:36
|
显示全部楼层
本帖最后由 einsteank 于 2018-1-16 10:46 编辑 2 x* {* L- w2 K
+ V" U' ]0 b8 p. H
The TCP Intercept feature can operate in either active intercept mode or passive watch mode. The default is intercept mode.
' I* V. B: Q8 g# G
9 O8 K, ]9 j# r6 ~ T0 B8 bIn intercept mode, the software actively intercepts each incoming connection request (SYN) and responds on behalf of the server with a SYN-ACK, then waits for an acknowledge (ACK) from the client. When the ACK is received, the original SYN is sent to the server and the software performs a three-way handshake with the server. When the three-way handshake is complete, the two half connections are joined. |
5#
2018-1-16 10:42:36
回复(0)
收起回复
|