CCNA实验题里的选择题会怎么变化

linqianqian

大神们，NA的实验题里也有选择题，通过查看配置找答案，考试的时候会不会配置发生变化从而导致答案有变化？如果变化的话，题库里若是没有出现过怎么办，超出了题库范围我看不懂怎么办呢？比如在RIPv2那个题中，第一个小题，因为VLAN封装没有正确配置，所以选择A，考试的时候会不会show出来的和题库里的信息不一样而选B呢？要是发生变化，我就怕自己看不懂呀。
--Router R1 connects the main office to internet, and routers R2 and R3 are internal
routers
--NAT is enabled on Router R1
--The routing protocol that is enabled between Rl, R2 and R3 is RIPv2
--R1 sends default route into RIPv2 for internal routers to forward internet traffic to
R1
--Serverl and Server 2 are placed in VLAN 100 and 200 respectively, and are still
running on stick
Configuration with router R2.
You have console access on Rl, R2, R3 and L2SW1 devices.
Use only show commands to troubleshoot the issues.
1.Serverl and Server2 are unable to communicate with the rest of the network. Your
initial check with system administrators shows that IP address settings are correctly
configured on the server side. What could be an issue?
A.The VLAN encapsulation is misconfigured on the router subinterfaces.
B.The Router is missing subinterface configuration.
C.The Trunk is not configured on the L2SW1 switch.
D.The IP address is misconfigured on the primary router interface.
Answer： A

小乔

这种题不会变  原题