CISCO 2504连接CONSOLE口后没有任何响应

lukegz

新到的2504连接CONSOLE口后没有任何响应。使用该线连接ASA，SWITCH及ROUTER都正常。有哪位大侠知道如何解决

小乔

重装IOS试试

lukegz

小乔 发表于 2016-11-30 13:38
重装IOS试试

新的WLC，现有都没有办法登录进去

lukegz

小乔 发表于 2016-11-30 13:38
重装IOS试试

新的WLC，现有都没有办法登录进去

byw619

小乔 发表于 2016-11-30 13:38
重装IOS试试

咋重装呢，有盲刷的方法吗

byw619

这个我是这样理解的，你可以猜它的管理IP，然后就可以进WEB，输入这个管理IP
管理口的IP一般为192.168.1.1或者10.0.0.1.
第二种方法，你需要打开这个的盖子，里面有一个备用的console,我试过有输出的，
输出如下：
PP0:~CONSOLE-> Application in 64-bit mode (ptrsize= 8 bytes)
PP0:~CONSOLE-> # cvmcs: Cores are running at 750000000 Hz
PP0:~CONSOLE-> # cvmcs: BOOT CORE: Core 0; DISPLAY CORE: Core 1
PP0:~CONSOLE-> # fp_hal_platform_init: SZABLA core_mask=0x3 num_cores=2 pool=163
84/16384/4096/128
PP0:~CONSOLE-> Allocating memory from 0x410000000 to 0x412000000 for Pool 0
PP0:~CONSOLE-> Allocating memory from 0xfc00000 to 0xfe00000 for Pool 1
PP0:~CONSOLE-> Allocating memory from 0x3ec00000 to 0x3f000000 for Pool 2
PP0:~CONSOLE-> Allocating memory from 0x100580 to 0x120580 for Pool 3
PP0:~CONSOLE-> POOL 0 (each buffer is 2048 bytes):
PP0:~CONSOLE->   [0] : start = 0x410000000,  end = 0x411FFFFFF, entries = 16384
PP0:~CONSOLE->
PP0:~CONSOLE-> POOL 1 (each buffer is 128 bytes):
PP0:~CONSOLE->   [0] : start = 0xFC00000,  end = 0xFDFFFFF, entries = 16384
PP0:~CONSOLE->
PP0:~CONSOLE-> POOL 2 (each buffer is 1024 bytes):
PP0:~CONSOLE->   [0] : start = 0x3EC00000,  end = 0x3EFFFFFF, entries = 4096
PP0:~CONSOLE->
PP0:~CONSOLE-> POOL 3 (each buffer is 1024 bytes):
PP0:~CONSOLE->   [0] : start = 0x100580,  end = 0x12057F, entries = 128
PP0:~CONSOLE->
PP0:~CONSOLE-> Interface 0 has 4 ports (SGMII)
PP0:~CONSOLE-> Interface 3 has 4 ports (LOOP)
PP0:~CONSOLE-> [ DRV ] Driver Initialization
PP0:~CONSOLE-> [ DRV ] Allocating memory for octeon device
PP0:~CONSOLE-> [ DRV ] PKO Done
PP0:~CONSOLE-> [ DRV ] Setting up DMA Engines
PP0:~CONSOLE-> Writing DMA[0] base addr as 0x0000000411fff000 to 0x80011f0000000
110
PP0:~CONSOLE-> [ DRV ] DMA Q[0]: Chunk @ 0xfdfff80 size: 256 max_words: 255
PP0:~CONSOLE-> Writing DMA[1] base addr as 0x0000000411ffe800 to 0x80011f0000000
108
PP0:~CONSOLE-> [ DRV ] DMA Q[1]: Chunk @ 0xfdfff00 size: 256 max_words: 255
PP0:~CONSOLE-> cvm_setup_pci_load_store: Setting up registers for PCI load/store
ops
PP0:~CONSOLE-> [ DRV ] subdid3 base is 0x80011b0000000000
PP0:~CONSOLE-> calling init for wlan stats
PP0:~CONSOLE-> WLAN NBAR2 STATS dump allocated 835584 bytes
PP0:~CONSOLE-> WLC NBAR2 STATS  allocated 835584 bytes
PP0:~CONSOLE-> WLC NBAR2 APPValidBits allocated 3264 bytes
PP0:~CONSOLE->
PP0:~CONSOLE->
PP0:~CONSOLE-> Active FP Cores in System = 02.
PP0:~CONSOLE->
PP0:~CONSOLE->
PP0:~CONSOLE-> Booting DP ID 0
PP0:~CONSOLE-> Registering HotReset Handler (Opcode: 0x1002)
PP0:~CONSOLE-> [ DRV ] Registered handler @ 0x10125430 for opcode: 1002
PP0:~CONSOLE-> [ DRV ] Core app is active. Sending indication to host
PP0:~CONSOLE-> [ DRV ] Registered handler @ 0x1012c1b8 for opcode: 111c
PP0:~CONSOLE-> Pool stats: [0: 16371 ] [1: 16380 ] [2: 4084 ] [3: 128 ]

byw619

byw619 发表于 2022-4-9 12:07
这个我是这样理解的，你可以猜它的管理IP，然后就可以进WEB，输入这个管理IP
管理口的IP一般为192.168.1.1 ...

到这一步我也不会了，估计是要传一个什么文件