H3C三层交换配置求助

YanuJ

整体拓扑如下：


求图中三层交换S5500-28C-EI-D的配置命令。

要求：
1、所有VLAN的PC可以相互访问
2、各VLAN都开启DHCP
3、各VLAN的PC全部可以访问外网
4、开启WEB、TELNET服务

H3C的设备第一次搞，不是很懂。求大神直接]贴配置命令，谢谢。

附上我已在模拟器上配置的命令，感觉怪怪的，不正确的地方请举出来，感激。

system-view
sysname 3SW

vlan 10
vlan 20
vlan 30
vlan 40
vlan 50
vlan 60

quit

int Vlan-interface 10
ip address 10.10.10.254 255.255.255.0
undo shutdown
int Vlan-interface 20
ip address 10.10.20.254 255.255.255.0
undo shutdown
int Vlan-interface 30
ip address 10.10.30.254 255.255.255.0
undo shutdown
int Vlan-interface 40
ip address 10.10.40.254 255.255.255.0
undo shutdown
int Vlan-interface 50
ip address 10.10.50.254 255.255.255.0
undo shutdown
int Vlan-interface 60
ip address 10.10.60.254 255.255.255.0
undo shutdown

quit

interface GigabitEthernet 1/0/1
port access vlan 10
port link-type trunk
port trunk permit vlan all

interface GigabitEthernet 1/0/2
port access vlan 10
port link-type trunk
port trunk permit vlan all

interface GigabitEthernet 1/0/3
port access vlan 20
port link-type trunk
port trunk permit vlan all

interface GigabitEthernet 1/0/4
port access vlan 20
port link-type trunk
port trunk permit vlan all

interface GigabitEthernet 1/0/5
port access vlan 30
port link-type trunk
port trunk permit vlan all

interface GigabitEthernet 1/0/6
port access vlan 30
port link-type trunk
port trunk permit vlan all

interface GigabitEthernet 1/0/7
port access vlan 40
port link-type trunk
port trunk permit vlan all

interface GigabitEthernet 1/0/8
port access vlan 40
port link-type trunk
port trunk permit vlan all

interface GigabitEthernet 1/0/9
port access vlan 50
port link-type trunk
port trunk permit vlan all

interface GigabitEthernet 1/0/10
port access vlan 50
port link-type trunk
port trunk permit vlan all

interface GigabitEthernet 1/0/11
port access vlan 60
port link-type trunk
port trunk permit vlan all

interface GigabitEthernet 1/0/12
port access vlan 60
port link-type trunk
port trunk permit vlan all
exit

dhcp server ip-pool vlan10
gateway-list 10.10.10.254
network 10.10.10.0 mask 255.255.255.0

dhcp server ip-pool vlan20
gateway-list 10.10.20.254
network 10.10.20.0 mask 255.255.255.0

dhcp server ip-pool vlan30
gateway-list 10.10.30.254
network 10.10.30.0 mask 255.255.255.0

dhcp server ip-pool vlan40
gateway-list 10.10.40.254
network 10.10.40.0 mask 255.255.255.0

dhcp server ip-pool vlan50
gateway-list 10.10.50.254
network 10.10.50.0 mask 255.255.255.0

dhcp server ip-pool vlan60
gateway-list 10.10.60.254
network 10.10.60.0 mask 255.255.255.0

int Vlan-interface 10
dhcp select server
dhcp server apply ip-pool vlan10

int Vlan-interface 20
dhcp select server
dhcp server apply ip-pool vlan20

int Vlan-interface 30
dhcp select server
dhcp server apply ip-pool vlan30

int Vlan-interface 40
dhcp select server
dhcp server apply ip-pool vlan40

int Vlan-interface 50
dhcp select server
dhcp server apply ip-pool vlan50

int Vlan-interface 60
dhcp select server
dhcp server apply ip-pool vlan60
exit

dhcp server forbidden-ip 10.10.10.254
dhcp server forbidden-ip 10.10.20.254
dhcp server forbidden-ip 10.10.30.254
dhcp server forbidden-ip 10.10.40.254
dhcp server forbidden-ip 10.10.50.254
dhcp server forbidden-ip 10.10.60.254

gentlebrother

thanks for sharing

wy76519

配置有很多错误，没有配置三层互联VLAN（与路由器互连用）及VLAN虚接口，没有配置默认路由，DHCP没有配置DNS，接口模式是ACCESS，配置的Trunk能有效？另外ER5200上需要配置各个VLAN网段的回程静态路由。