设为首页收藏本站language 语言切换
查看: 1740|回复: 3
收起左侧

中兴1800配置,上不了网,高手赐教!

[复制链接]
发表于 2014-12-4 18:53:43 | 显示全部楼层 |阅读模式
Building configuration...
!
!
ip dhcp enable
ip dhcp server dns 202.101.224.68
!
ip dhcp-client enable
!
urpf log off
!
ip local pool dhcp 192.168.1.3 192.168.1.254 255.255.255.0
!
mac-filter permit all
!
blacklist disable
!
!
interface null1
  out_index 1
!
interface dialer1
  out_index 7
  ip tcp adjust-mss 1200
  ppp authentication pap
  ppp pap sent-username 13767312776 password 051575
  dialer pool 1
  ip nat outside
!
interface cellular1
  out_index 2
!
interface cellular2
  out_index 3
!
interface fei_0/1
  out_index 4
  ip tcp adjust-mss 1200
  negotiation auto
  dialer pppoe-client-pool-member 1 1 permanent
!
interface fei_0/2
  ip address 192.168.1.2 255.255.255.0
  out_index 5
  ip tcp adjust-mss 1200
  negotiation auto
  ip dhcp mode server
  ip dhcp server gateway 192.168.1.1
  ip nat inside
!
interface fei_0/3
  out_index 6
  negotiation auto
!
!
reference clock local
!
ip nat max-entry-number 64
ip nat start
ip nat inside source list 1 interface dialer1
ip nat translation timeout class a 20
ip nat translation timeout class b 60
ip nat translation timeout class c 150
ip nat translation timeout class d 300
ip nat translation timeout class e 1200
ip nat translation timeout protocol icmp a
ip nat translation timeout protocol ip d
ip nat translation timeout protocol tcp port 80 a
ip nat translation timeout protocol tcp d
ip nat translation timeout protocol udp port 4000 d
ip nat translation timeout protocol udp port 4001 d
ip nat translation timeout protocol udp port 4002 d
ip nat translation timeout protocol udp port 4003 d
ip nat translation timeout protocol udp port 8000 d
ip nat translation timeout protocol udp port 8001 d
ip nat translation timeout protocol udp c
ip nat translation maximal default 65535
!
ip route 0.0.0.0 0.0.0.0 dialer1
!
voice class service
!
!
!
router ospf 1
  network 0.0.0.0 0.0.0.0 area 0.0.0.0
!
no ipv6 nat enable
!
!
time-range disable
!
acl standard number 1
  rule 1 permit any
!
!
!
ip tcp intercept mode intercept
ip tcp intercept drop-mode oldest
ip tcp intercept watch-timeout 30
ip tcp intercept finrst-timeout 5
ip tcp intercept connection-timeout 86400
ip tcp intercept max-incomplete high 1100
ip tcp intercept max-incomplete low 900
ip tcp intercept one-minute high 1100
ip tcp intercept one-minute low 900
!
nas
!
version V4.8.01.B.01
!
nvram mng-ip-address 10.40.89.3 255.255.0.0
!
nvram boot-username target
!
nvram boot-password target
!
nvram boot-server 10.40.89.78
!
nvram default-gateway 10.40.89.78
!
nvram imgfile-location local
!
hostname ZXR10
!
forward re-fragment time 6
!
enable secret level 15 5 RcMLuUKvnFZX9kNAV6A/UA==
!
username zxr10 password zsr
!
user-authentication-type local
user-authorization-type local
!
line console 0
  no login authentication
!
banner incoming @
              *****************************************************
              Welcome to ZXR10 ZSR Serial Router of ZTE Corporation
              *****************************************************
@
!
!
lfap disable
lfap max-send-fun-size 100
lfap update-interval 60
lfap server-retry-interval 60
lfap message-response-interval 60
lfap ka-interval 60
lfap flow-expired-time 600
!
!
!
snmp-server location No.68 Zijinghua Rd. Yuhuatai District, Nanjing, China
snmp-server contact +86-25-52870000
snmp-server packetsize 1400
snmp-server engine-id 830900020300010289d64401
snmp-server view AllView internet included
snmp-server view DefaultView system included
!
!
web enable
!
logging on
logging buffer 200
logging mode fullcycle
logging console notifications
logging level notifications
logging cmdlog-interval 2880
logging timestamps datetime localtime
alarm cpuload-on
alarm cpuload-interval 30
alarm cpuload-threshold high-grade 95 middle-grade 85 low-grade 75
syslog-server facility local0
!
line console idle-timeout 120
line console absolute-timeout 1440
line telnet idle-timeout 120
line telnet absolute-timeout 1440
!
ssh server authentication ispgroup 1
ssh server authentication mode local
ssh server authentication type chap
no ssh server only
ssh server version 2
!
!
radius auto-change off
!
!
!
radius server-port-check off
!
!
tacacs disable
tacacs disable
tacacs-server packet 1024
!
!
amat disable
system monitor on
!
ip stream disable
!
end

发表于 2014-12-5 08:52:13 | 显示全部楼层
太棒了,感谢楼主
沙发 2014-12-5 08:52:13 回复 收起回复
回复 支持 反对

使用道具 举报

发表于 2014-12-27 10:14:15 | 显示全部楼层
哈哈!太好笑了.
板凳 2014-12-27 10:14:15 回复 收起回复
回复 支持 反对

使用道具 举报

发表于 2015-1-15 15:18:24 | 显示全部楼层
这个,感觉看不懂
地板 2015-1-15 15:18:24 回复 收起回复
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 论坛注册

本版积分规则

QQ|Archiver|手机版|小黑屋|sitemap|鸿鹄论坛 ( 京ICP备14027439号 )  

GMT+8, 2025-2-12 09:31 , Processed in 0.058296 second(s), 23 queries , Redis On.  

  Powered by Discuz!

  © 2001-2025 HH010.COM

快速回复 返回顶部 返回列表