nexus5010密码恢复记录

fy923

重启后等待按ctrl+] ，，这款交换机启动的慢慢哟哟。
switch(boot)# ?
Exec commands:
  clear     Reset functions
  config    Enter configuration mode
  copy      Copy from one file to another
  delete    Delete a file or directory
  dir       Directory listing for files
  erase     Erase Sam Configuration
  exit      Exit from the EXEC
  find      Find a file below the current directory
  format    Format disks
  init      Initialize internal disk
  load      Load system image
  mkdir     Create new directory
  move      Move files
  no        Disable debugging functions
  pwd       View current directory
  reload    Reboot this supervisor module
  rmdir     Remove existing directory
  show      Show running system information
  sleep     Sleep for the specified number of seconds
  ssh       SSH to another system
  tail      Display the last part of a file
  terminal  Set terminal line parameters
  write     Write current configuration

switch(boot)# conf t
Enter configuration commands, one per line.  End with CNTL/Z.
switch(boot)(config)# ?
Configure commands::
admin-password  Set password for admin
  do              EXEC command
  end             Exit from configure mode
  exit            Exit from configure mode
  interface       Select an interface to configure
  ip              Configure the ip parameters
  no              Negate a command or set its defaults
switch(boot)(config)# admin-password ?
  <WORD>  Password for user admin (Max Size - 64)
switch(boot)(config)# admin-password xxxxxxxxxxxxx复杂要求
WARNING! Enabling local authentication for login through console due to password recovery
switch(boot)(config)# end
switch(boot)# write ?
  erase  Destroys the configuration on persistent media
switch(boot)# load ?
  bootflash:  Enter image URI
  slot0:      Enter image URI
switch(boot)# load bootflash:?
bootflash:lost+found                          
bootflash:mts.log                             
bootflash:n5000-uk9-kickstart.5.0.3.N2.1.bin  
bootflash:n5000-uk9.5.0.3.N2.1.bin            
bootflash:vdc_2                              
bootflash:vdc_3                              
bootflash:vdc_4                              
switch(boot)# load bootflash:/n5000-uk9.5.0.3.N2.1.bin
Uncompressing system image: bootflash:/n5000-uk9.5.0.3.N2.1.bin
Loading plugin 0: core_plugin...
Loading plugin 1: eth_plugin...
ethernet switching mode
INIT: Switching to runlevel: 3
INIT: Sending processes the TERM signal
INIT: (boot)#
Exporting directories for NFS kernel daemon...done.
Starting NFS kernel daemon:rpc.nfsd.
rpc.mountddone.

changyingruilv