请问gns3 的s0/0为什么老掉线

pounding

Mar  1 00:03:55.119: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 90: Neighbor 13.1.1.3 (Serial0/1) is down: holding time expired
Router#
*Mar  1 00:03:58.615: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 90: Neighbor 13.1.1.3 (Serial0/1) is up: new adjacency
*Mar  1 00:04:14.351: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 90: Neighbor 13.1.1.3 (Serial0/1) is down: holding time expired
*Mar  1 00:04:14.947: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 90: Neighbor 13.1.1.3 (Serial0/1) is up: new adjacency



应该怎么更改设置？

lzpdyhh

最好检查一下13.1.1.3地址有没有别的设备重复使用了

pounding

lzpdyhh 发表于 2013-11-19 09:55

                               
登录/注册后可看大图

最好检查一下13.1.1.3地址有没有别的设备重复使用了

R3
interface Serial0/0
ip address 13.1.1.3 255.255.255.0
serial restart-delay 0
clock rate 1200
R2
interface Serial0/1
ip address 13.1.1.2 255.255.255.0
serial restart-delay 0

lzpdyhh

pounding 发表于 2013-11-19 10:30

                               
登录/注册后可看大图

R3
interface Serial0/0
ip address 13.1.1.3 255.255.255.0

试试clock rate 64000撒