关于juniper模拟器的问题，求指教

yiyi32373614

1.GNS3中juniper加载速度慢，加载时间估计要5分钟以上，多开几台设备内存使用率会飙升，时间也更长。这个问题怎么解决。

2.VMware中olive环境搭建好了，但是不知道怎么搭建拓扑。求指点


本人邮箱yem0731@qq.com

pet_890313

luori

gzy900715

楼主能否把你的模拟器也共享给小弟下756846238@qq。com，感激不尽了

xiaoli66

文章真心不错，顶了哦

freeboyxu

platform_early_bootinit: M/T Series Early Boot Initialization
Olive CPU
GDB: debug ports: sio
GDB: current port: sio
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
Copyright (c) 1996-2011, Juniper Networks, Inc.
All rights reserved.
Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
JUNOS 11.1R1.14 #0: 2011-03-28 21:30:39 UTC
    builder@briath.juniper.net:/volume/build/junos/11.1/release/11.1R1.14/obj-i386/bsd/kernels/JUNIPER/kernel
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (6529.65-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x633  Stepping = 3
  Features=0x781abfd<FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,PGE,CMOV,PAT,MMX,FXSR,SSE,SSE2>
  Features2=0x80000001<SSE3,<b31>>
real memory  = 100597760 (95 MB)
avail memory = 84295680 (80 MB)
MPTable: <QEMUCPU  0.1         >
Security policy loaded: JUNOS MAC/runasnonroot (mac_runasnonroot)
Security policy loaded: JUNOS MAC/pcap (mac_pcap)
ioapic0: Changing APIC ID to 1
ioapic0: Assuming intbase of 0
ioapic0 <Version 1.1> irqs 0-23 on motherboard
Initializing M/T platform properties ..
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pir0: <PCI Interrupt Routing Table: 6 Entries> on motherboard
$PIR: BIOS IRQ 11 for 0.5.INTA does not match link 0x60 irq 9
pci0: <PCI bus> on pcib0
$PIR: No matching entry for 0.7.INTA
$PIR: No matching entry for 0.8.INTA
$PIR: No matching entry for 0.9.INTA
Correcting Natoma config for non-SMP
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 WDMA2 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xc000-0xc00f at device 1.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
smb0: <Intel 82371AB SMB controller> irq 9 at device 1.3 on pci0
pci0: <display, VGA> at device 2.0 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 0xc040-0xc07f mem 0xf2020000-0xf203ffff irq 11 at device 3.0 on pci0
em1: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 0xc080-0xc0bf mem 0xf2040000-0xf205ffff irq 9 at device 4.0 on pci0
em2: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 0xc0c0-0xc0ff mem 0xf2060000-0xf207ffff irq 9 at device 5.0 on pci0
em3: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 0xc100-0xc13f mem 0xf2080000-0xf209ffff irq 9 at device 6.0 on pci0
em4: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 0xc140-0xc17f mem 0xf20a0000-0xf20bffff irq 11 at device 7.0 on pci0
em5: <Intel(R) PRO/1000 Network Connection Version - 3.2.18> port 0xc180-0xc1bf mem 0xf20c0000-0xf20dffff irq 9 at device 8.0 on pci0
pci0: <memory, RAM> at device 9.0 (no driver attached)
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse Explorer, device ID 4
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x90 on isa0
sio0: type 16550A, console
sio1: configured irq 5 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio2: configured irq 3 not in bitmap of probed irqs 0
sio2: port may not be enabled
sio3: configured irq 7 not in bitmap of probed irqs 0
sio3: port may not be enabled
Initializing product: 1 ..
Setting up M/T interface operations and attributes
platform_mastership_init: Unknown product_type 0x00000001
em5: bus=0, device=8, func=0, Ethernet address 00:00:ab:fc:69:05
em4: bus=0, device=7, func=0, Ethernet address 00:00:ab:be:53:04
em3: bus=0, device=6, func=0, Ethernet address 00:00:ab:df:3f:03
em2: bus=0, device=5, func=0, Ethernet address 00:00:ab:29:47:02
em1: bus=0, device=4, func=0, Ethernet address 00:ab:ae:99:e3:01
em0: bus=0, device=3, func=0, Ethernet address 00:ab:ae:99:e3:00
Timecounter "TSC" frequency 6529651587 Hz quality 800
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
ad0: Device does not support APM
ad0: 4096MB <QEMU HARDDISK 0.11.0> at ata0-master WDMA2
ad1: Device does not support APM
ad1: 1024MB <QEMU HARDDISK 0.11.0> at ata0-slave WDMA2
Trying to mount root from ufs:/dev/ad0s1a
WARNING: / was not properly dismounted

freeboyxu

是这样哦，我也想知道

人在旅途2013

routing-to-sky

我用GNS3加载junos，速度也是慢，但起来之后就还好了，开三四台router还是没有问题的。唯一遇到的bug就是，重启机子之后interface会down掉，暂时还没有解决掉。o(╯□╰)o