感謝鴻鵠論壇的題庫太強大了,沒有一題有驚喜,全在題庫中繼續交換的課程,底下分享考試心得: 1.redistribute:除了redistribute外,多加distance那條命令即可,我的驗證是在R1能夠PING 通R4 LOOPBACK口 2.ROUTE-MAP :SP1的地址有變、請看清楚,作完在測試區會看到9個packet 即可 3.ipv6 virtual link:作完在R1看show路由表有fec0:4::4 就OK" F6 H' Y! H5 k' X O
4.eigrp stub:我是用10.2.0.0 255.255.0.0 作匯總 。- Z# O' i$ Q5 y9 @( J! ^
5.ospf:很多地址更改了,我是一個一個檢查,然後一個一個路由器PING 全通收工。
) W9 Y, e6 C6 q) R最后说一句,ospf实验一定要copy run sta保存,因為這介面是CCNA 舊的介面。 底下分享一題不一樣的, QUESTION338 Whatis the purpose of the eigrp stub configuration command? A.to increase scalability by limiting the EIGRP query range B.to reduce the size of the routing table by blocking the D EX (External EIGRP)routes into the EIGRP stubrouter C.to reduce the convergence time by enabling the EIGRP stub router to propagatethe EIGRP queries fromthe EIGRP hub router D.to reduce the convergence time by enabling the EIGRP stub router to alsoperform query requests to theEIGRP hub router Answer:A 上述這一題我選的是c 最後 eigrp 拿100% ,so 題庫有誤 ! R: X* U* `- |1 V8 l* b* {
|