ipv6show接口的问题

goodliug1988

R3(config)#do show ipv int tun 3
Tunnel3 is up, line protocol is down
  IPv6 is enabled, link-local address is FE80::303:303 [TEN]
  No global unicast address is configured
  Joined group address(es):
    FF02::1
    FF02::2
    FF02::9
    FF02::1:FF03:303
  MTU is 1480 bytes
  ICMP error messages limited to one every 100 milliseconds
  ICMP redirects are enabled
  ND DAD is enabled, number of DAD attempts: 1
  ND reachable time is 30000 milliseconds
  Hosts use stateless autoconfig for addresses.

我在show接口的时候fe80地址后面有个ten是什么意思？
能不能帮忙解释一下为什么会有这个？

goodliug1988

有没有人给解释一下啊！~~

安晓诺

  坐等