华为AR28-31路由器的配置

雨中漫步

查看当前的配置

display current-configuration
进入到系统配置状态（相当于CISCO设备的EN 命令）

sys

System View: return to User View with Ctrl+Z.

[huawei]
[quidway]sysname huawei

[huawei]
保存配置

[huawei]save

The configuration will be written to the device.

Are you sure?[Y/N]y

Please input the file name(*.cfg)[flash:/config.cfg]:config0821.cfg
Now saving current configuration to the device.

Saving configuration flash:/config0821.cfg. Please wait...

......

Current configuration has been saved to the device successfully.

再次保存，就直接保存到之前起的文件名中。
save

The configuration will be written to the device.

Are you sure?[Y/N]y

Now saving current configuration to the device.

Saving configuration flash:/config0821.cfg. Please wait...

.......

Current configuration has been saved to the device successfully.
配置以太网网口

[huawei]interface Ethernet 0/0

[huawei-Ethernet0/0]ip addre

[huawei-Ethernet0/0]ip address 172.16.5.249 255.255.255.0

[huawei-Ethernet0/0]quit

[huawei] （如用ctrl+z 就退回到 状态下了。）
配置虚拟终端

[huawei]user-interface vty 0 4

[huawei-ui-vty0-4]authentication-mode password

huawei-ui-vty0-4]set authentication password cipher huawei2 （设置密码为huawei2)

lxhong1979

介绍得不错，学习哦。