急！902双向重分布实验求助

shady

明天打算去考902，今天下午模拟做实验时，在双向重分布时，为什么我显示的一直是走的R3，显示的路径是：192.168.1.2（R2） 192.168.2.2 （R3） 192.168.4.2 （R4），这种情况是对的么，我怎么感觉好像题库上讲的好像是去得时候是R1-R2-R4-R5回来的时候是R5-R4-R3-R2-R1呢？急啊，救助各位大侠们解答。拓扑和配置如下：
R0：interface FastEthernet1/1
ip address 192.168.1.1 255.255.255.0
duplex auto
speed auto
!
interface Vlan1
no ip address
shutdown
!
router eigrp 100
network 192.168.1.0
auto-summary
!
R1：interface FastEthernet0/0
ip address 192.168.2.1 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet0/1
no ip address
duplex auto
speed auto
shutdown
!
interface Serial0/3/0
ip address 192.168.3.1 255.255.255.0
clock rate 9600
!
interface Serial0/3/1
no ip address
shutdown
!
interface FastEthernet1/0
no ip address
duplex auto
speed auto
shutdown
!
interface FastEthernet1/1
ip address 192.168.1.2 255.255.255.0
duplex auto
speed auto
!
interface Vlan1
no ip address
shutdown
!
router eigrp 100
distance eigrp 90 109
redistribute ospf 1 metric 1544 2000 255 1 1500
network 192.168.1.0
network 192.168.2.0
auto-summary
!
router ospf 1
log-adjacency-changes
redistribute eigrp 100 metric-type 1 subnets
network 192.168.3.0 0.0.0.255 area 24
R2：interface FastEthernet0/0
ip address 192.168.2.2 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet0/1
no ip address
duplex auto
speed auto
shutdown
!
interface Serial0/3/0
no ip address
shutdown
!
interface Serial0/3/1
no ip address
shutdown
!
interface FastEthernet1/0
no ip address
duplex auto
speed auto
shutdown
!
interface FastEthernet1/1
ip address 192.168.4.1 255.255.255.0
duplex auto
speed auto
!
interface Vlan1
no ip address
shutdown
!
router eigrp 100
redistribute ospf 1 metric 10000 100 255 1 1500
network 192.168.2.0
auto-summary
!
router ospf 1
log-adjacency-changes
redistribute eigrp 100 metric-type 1 subnets
network 192.168.4.0 0.0.0.255 area 34
R3：
interface FastEthernet0/0
ip address 172.16.100.1 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet0/1
no ip address
duplex auto
speed auto
shutdown
!
interface Serial0/3/0
ip address 192.168.3.2 255.255.255.0
!
interface Serial0/3/1
no ip address
shutdown
!
interface FastEthernet1/0
no ip address
duplex auto
speed auto
shutdown
!
interface FastEthernet1/1
ip address 192.168.4.2 255.255.255.0
duplex auto
speed auto
!
interface Vlan1
no ip address
shutdown
!
router ospf 1
log-adjacency-changes
network 192.168.3.0 0.0.0.255 area 24
network 192.168.4.0 0.0.0.255 area 34
network 172.16.100.0 0.0.0.255 area 0
R4：
interface FastEthernet0/0
ip address 172.16.100.2 255.255.255.0
duplex auto
speed auto
!
interface FastEthernet0/1
no ip address
duplex auto
speed auto
shutdown
!
interface FastEthernet1/0
no ip address
duplex auto
speed auto
shutdown
!
interface FastEthernet1/1
no ip address
duplex auto
speed auto
shutdown
!
interface Vlan1
no ip address
shutdown
!
router ospf 1
log-adjacency-changes
network 172.16.100.0 0.0.0.255 area 0




麻烦各位大侠帮忙看一下，谢谢了

shady

还有一个问题，图片当中的有去有回的ping是哪条命令？或者说怎么弄的？

Y()

两个都 是F口要再R2修改eigrp的外部管理距离，小于 110

rogerxyz

shady 发表于 2011-12-8 16:10

                               
登录/注册后可看大图

还有一个问题，图片当中的有去有回的ping是哪条命令？或者说怎么弄的？

R1#ping
Protocol [ip]:
Target IP address: 172.16.100.1
Repeat count [5]:
Datagram size [100]:
Timeout in seconds [2]:
Extended commands [n]: y
Source address or interface: 192.168.1.1
Type of service [0]:
Set DF bit in IP header? [no]:
Validate reply data? [no]:
Data pattern [0xABCD]:
Loose, Strict, Record, Timestamp, Verbose[none]: R
Number of hops [ 9 ]:
Loose, Strict, Record, Timestamp, Verbose[RV]:
Sweep range of sizes [n]:
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.100.1, timeout is 2 seconds:
Packet sent with a source address of 192.168.1.1
Packet has IP options:  Total option bytes= 39, padded length=40
Record route: <*>
   (0.0.0.0)
   (0.0.0.0)
   (0.0.0.0)
   (0.0.0.0)
   (0.0.0.0)
   (0.0.0.0)
   (0.0.0.0)
   (0.0.0.0)
   (0.0.0.0)

Reply to request 0 (316 ms).  Received packet has options
Total option bytes= 40, padded length=40
Record route:
   (192.168.1.1)
   (192.168.2.1)
   (192.168.4.2)
   (172.16.100.1)
   (192.168.4.1)
   (192.168.2.2)
   (192.168.1.2)
   (192.168.1.1) <*>
   (0.0.0.0)
End of list