设为首页收藏本站language→→ 语言切换

鸿鹄论坛

 找回密码
 论坛注册

QQ登录

先注册再绑定QQ

查看: 693|回复: 4
收起左侧

[问题求助] 思科路由器数据长度较大时ping不通

[复制链接]
发表于 2018-10-20 21:07:43 | 显示全部楼层 |阅读模式
我在做IP分片的实验,链路上最小的MTU是700,我发送长度为800的数据包时显示是可以ping通的:
  1. R1#ping 192.34.5.1 size 800 source 192.34.4.1

  2. Type escape sequence to abort.
  3. Sending 5, 800-byte ICMP Echos to 192.34.5.1, timeout is 2 seconds:
  4. Packet sent with a source address of 192.34.4.1
  5. !!!!!
  6. Success rate is 100 percent (5/5), round-trip min/avg/max = 44/80/200 ms
  7. R1#
复制代码


但是发送大小为900的数据包时就不通了,显示超时:
  1. R1#ping 192.34.5.1 size 900 source 192.34.4.1

  2. Type escape sequence to abort.
  3. Sending 5, 900-byte ICMP Echos to 192.34.5.1, timeout is 2 seconds:
  4. Packet sent with a source address of 192.34.4.1
  5. .....
  6. Success rate is 0 percent (0/5)
复制代码


这是什么情况啊,很急很急,在线等。。。
发表于 2018-10-21 01:23:16 | 显示全部楼层
check the routing table on both side!
沙发 2018-10-21 01:23:16 回复 收起回复
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 论坛注册

本版积分规则

QQ|Archiver|手机版|小黑屋|sitemap|鸿鹄论坛 ( 京ICP备14027439号 )  

GMT+8, 2024-4-20 11:40 , Processed in 0.055490 second(s), 9 queries , Redis On.  

  Powered by Discuz!

  © 2001-2024 HH010.COM

快速回复 返回顶部 返回列表