GNS3 0.7.4

鸿鹄

GNS3 0.7.4 & Dynamips 0.2.8RC3 community release

GNS3 0.7.4 is released. This is a minor release before working on a major one and includes the following things:

• Greek translation
• Hypervisor allocation per IOS type
• Improvements on Ethernet Switch (dynamic remapping of VLAN or type)
• Adaptations to support Dynamips 0.2.8 RC3 community
• Integration of a loopback manager for Windows
  

GNS3-0.7.4-win32-all-in-one.exe： 下载地址

http://sourceforge.net/projects/gns-3/files/GNS3/0.7.4/GNS3-0.7.4-win32-all-in-one.exe/download?use_mirror=nchc  

其中GNS3 0..4中包括 0.2.8 RC3 community版本，这个版本不是完全由Chris开发的版本，而是GNS dev修改的版本，主要增加了一些特性和BUG修补，具体如下：

Patch by Christophe Fillot:

- Online Insertion and Removal (OIR) support for c3745 (NM-4T only) and c3660.
- c7200: support for jacket card (C7200-JC-PA) and support for PA in slot 7.
- ATM: AAL5 CRC bug fix.
- New Multicast NIO.
- "nio set_mcast_ttl" hypervisor command to change TTL for multicast NIOs.
- 64-bit support for MacOS X 10.5 - Leopard (stack alignment).
- PPC32: DIVW instruction fix (incorrect cast: unsigned instead of signed).
   This was causing problems with OSPF (and probably other protocols)
   on 2600 platforms.
- Some minor info added (OS name) to ease debugging.
- NIO traffic statistics (packets/bytes in/out).
- QinQ support in integrated Ethernet switch.
- More coherent naming for JIT variables ("blocks" -> "tcb").
- PPC-host JIT patch from Zhe Fang.
- JIT code sharing system (only MIPS ported at this time)
- MIPS64 fixes in handling of TLB entries.
- "udp auto" NIO to avoid fixed port allocation which can easily fail.
- Bug fixes in socket handling (incorrect setsockopt() for non-RFC2553 systems)

Patch by Gordon Russell:
- New source code layout to allow stable and unstable to share code
   in common in a single distribution.
- Able to set system id at runtime in cli mode using -I  or set_system_id in hypervisor mode. This is for routers
   1700,2600,3600,3725,3745, and 7200 (not npe-400 or npe-g1 or 2).
   System id format is dependent on router, e.g. -I 4279256517 or
   -I FTX0945W0MY (these are the current defaults).
- AUX port for routers 1700 to 3745 now works.
- u16552 correctly emulates the latch bit, and decodes more registers.
- Telnet to AUX or CONSOLE is flushed much earlier.
- Make clean improved.
- IOS reload command for non c7200 now terminates the emulation.
- Setting mac address using -m works for non c7200 as well.
- Using inappropriate flag which is platform sensitive gives an error.
- Flag added --noctrl which disables ctrl+]
- Flag added --notelnetmsg which disables welcome text on telnet
   AUX and CONSOLE.
- Flag added --filepid  which saves the pid of dynamips to a file.
- Bug fix: xx:xx:xx:xx:xx:xx mac addresses in -m now accepted.
- Bug fix: JayTee patch included for sizeof error in networking
- Bug fix: closing telnet to AUX/CONSOLE may produce SIGPIPE which is now trapped when using non hypervisor mode.
- Bug fix: ghost file using -G now opened correctly as READONLY.

Other patches:
- Cisco Pagent and CallGen image support for c1700, c2600, c36xx, c37xx, c7200 NPE-100 to NPE-300:
  (please see http://www.sadikhov.com/forum/index.php?showtopic=157426&st=20 for details).

支持了Pagent and CallGen image

什么是Pagent and CallGen：参考http://www.netemu.cn/bbs/thread-9886-1-1.html


Dynamips 0.2.8 RC3 支持的型号的Cisco Pagent and CallGen image(ios)下载：

http://rapidshare.com/files/323333876/Cisco_IOS_Pagent-Callgen_for_Dynamips.part1.rar
http://rapidshare.com/files/323333032/Cisco_IOS_Pagent-Callgen_for_Dynamips.part2.rar
http://rapidshare.com/files/323334054/Cisco_IOS_Pagent-Callgen_for_Dynamips.part3.rar
http://rapidshare.com/files/323333464/Cisco_IOS_Pagent-Callgen_for_Dynamips.part4.rar

刘小娜

570829616

谢谢楼主啊

ccnayxy

767125433qq

oriverleaf

英文不好啊

MICKEYCHT

蔡建平

哇太好啦  ，太给力了

banzige

lexpp

支持

aa6933602

JOE188

zxhy1983

li_wuxing

顶 学习一下

kadin008